Daily/Weekly backup
1.Connect the USB device for backup.
You cannot use the CD or DVD writer for daily or weekly backup.
2.Select WEEKLY or DAILY on the schedule options.
3.Select the backup device.
4.Enter the date and/or time to start backup on the schedule start option.
5.Enter the day of week and/or time on the Time Range Start option.
6.Enter the day of week and/or time on the Time Range End option.
7.Select [Estimation Size] icon and press ENTER.
8.Check the size of selected data and free space of USB device. If the USB device has not enough space, change the USB device of enough space or erase the connected USB device.
Notes:
•You cannot stop the backup in backup progress.
•The warning message will appear for the conditions listed below.
-When the start time and end time setting are wrong.
-A media does not have enough space.
-When you set the time for data that does not exist.
-When the selected USB device is disconnected.
•The estimated size of backup data is only the approximate size. So you must prepare sufficient space on the media to prevent lack of space.
•At the scheduled recording time, you can check the backup status on the system control bar.
•While export is in progress or searching the backup data from the external USB device, the scheduled backup will not be started.
After the export or backup search is finished, scheduled backup will be restarted.
•If you use the CD/DVD writer device for backup,the backup status will be displayed as shown below.
-1st. Status of making ISO image
-2nd. Status of writing
System ID
zIR Remote Control: Select the system ID for this unit (1~9). If you use multi systems set the systems ID for each DVR unit.
HOOKUP AND SETTINGS
37