LG Electronics LDV-S504, LDV-S503 Schedule setup, Recording Frame Rate Settings, Display Settings

Recording Frame Rate Settings

1.Click the [Frame Rate Settings] button. The recording frame rate settings window appears.

2.Set each options using the mouse.

•Resolution: Select the recording resolution.

(NTSC: 352*240, 704*240 or 704*480 PAL: 352*288, 704*288 or 704*576)

•Quality: Select the recording picture quality. (Lowest, Low, Normal, High or Best)

•Frame Rate: Select the frame rate. The frame rate is the number of recorded frames in a second. According to resolution, the frame rate is set automatically. If you set manually, refer below.

Resolution		Frame Rate
	352*240	1, 3, 5, 7.5, 15, 20, 30
NTSC	704*240	1, 3, 5, 7.5, 15
	704*480	1, 3, 5, 7.5
	352*288	1, 3, 5, 6, 12.5, 20, 25
PAL	704*288	1, 3, 5, 6, 12.5
	704*576	1, 3, 5, 6

•Pre-Alarm Time: Specify the pre-event recording time to records the situation until the sensor alarm signal has input or motion has been detected. (Off, 5, 10, 20, 30, 40, 50, 60 Sec)

•Post-Alarm Time: Specify the post-event recording time that records the situation after the sensor alarm signal has input or motion has been detected. (10, 20, 30, 40, 50 Sec or 1, 2, 3, 5, 10 Min)

3.Click the [Ok] button to confirm the settings.

Display Settings

1.Set the OSD options.

2.Set the main monitor option.

3.Set the spot monitor options.

Schedule setup

1.Select a day of the week.

2.Mark up the desired recording option.

•No recording: Do not schedule recording.

•Continuous: Recording starts automatically at the preset time.

•Sensor: Recording starts automatically when alarm occurs within a designated time.

•Motion: Recording starts automatically when motion is detected within a designated time.

•Motion+Sensor: Recording starts automatically when alarm and motion detection occur within a designated time.

3.Select the channel to set the schedule.

4.Click the start time cell block and drag & drop to select a time period cell block.

or

Click the start time cell block of a channel and drag & drop across the channels to select the time period block for multi-channel setting at the same time.

The color of the cell blocks will change.

54