PTZ Camera Control
You can control the cameras connected via the data port of
1.Select the PTZ camera channel on the main mon- itor you want to control.
2.Press PTZ or Click the PTZ icon in the system control bar.
Virtual PTZ remote control is displayed on the main monitor.
3.Use each item to control the PTZ camera.
a
b
c
d e
f 
g
hj
ik l
aExit
Remove the PTZ virtual remote control.
bv/V/b/B
Use to pan/tilt the camera.
~
Confirm the preset position.
cZOOM + / -
To adjust the camera zoom.
dFOCUS + / -
To manually adjust the focus of a camera.
eIRIS + / -
To manually adjust the iris of a camera.
fDisplays the Selected Preset Number
gNumber Buttons
To input the preset number.
hSET
To register preset positions.
iMOVE
To move the camera to the preset position.
jCLEAR
To delete a memorized preset position.
kTOUR
To start a preset tour.
lSETUP
To displays the setup menu of the PTZ camera.
Preset Settings
Preset position is the function to register camera monitoring positions (preset positions) associated with position numbers.
By entering the position numbers, you can move cameras to the preset positions.
Note:
To activate this function, you need to register the pre- set positions of combination cameras.
To Register Preset Positions
1.Move the camera to a point you wish by using the v/V/b/B.
2.Press SET or click the [SET] icon.
3.Select the preset number you wish to register.
4.Press ENTER or click the [~] icon.
The position and its number are memorized.
5.Repeat steps
Note:
Preset numbers from 0 to 255 are available on this unit but the actual preset range differs depending on PTZ cameras.
Changing to a Picture in a Preset Position
The following function is available only with cameras provided with the preset function.
The preset function makes the combination camera move to the programmed preset position.
It is necessary to program preset positions for the combination camera beforehand.
1.Press the MOVE button or click the [MOVE] icon.
2.Use number buttons to enter the memorized pre- set position’s index number then press ENTER or click the [~] icon. The camera moves to the preset position and the picture of the camera in that posi- tion appears on the monitor.
HOOKUP AND SETTINGS
23