Using the Pan/Tilt/Zoom Function
You can control the PTZ cameras via the network.
1.Select the PTZ camera channel window in the camera view mode.
2.Select Pan/Tilt/Zoom tab.
3.Use virtual remote control buttons to control the PTZ camera.
a
b c d e
f
gi
h 
j k
av/V/b/B: Use to Pan/Tilt the camera.
~: To confirm the preset position and set a menu option in the PTZ camera.
bZOOM + / -
To adjust the camera zoom.
cFOCUS + / -
To manually adjust the focus of a camera.
dIRIS + / -
To manually adjust the iris of a camera.
eDisplays Selected Preset Numbers
fNumber Buttons
To input the preset number.
gSET
To register preset positions.
hMOVE
To move the camera to the preset position.
iCLEAR
To delete a memorized preset position.
jTOUR
To start a preset tour.
kSETUP
To displays the setup menu of the PTZ camera.
Notes:
•If someone is controlling a PTZ camera using the DVR, you cannot use the PTZ function and vice versa.
•You can not use the PTZ function when you log in with a normal user ID.
To Register Preset Positions
1.Move the camera to the point you wish by using the v/V/b/B.
2.Click the [SET] icon.
3.Select preset the number you wish to register.
4.Click the [~] icon.
The position and its numbers are memorized.
5.Repeat steps
Note:
The preset range is available from 0 to 255 on this unit. but the actual preset range differs depending on the PTZ cameras.
Changing to a Picture in a Preset Position
The following function is available only with cameras equipped with the preset function.
The preset function makes the combination camera move to the programmed preset position.
It is necessary to program preset positions for the combination camera beforehand.
1.Click the [MOVE] icon.
2.Use number icons to enter the memorized preset position’s index number then Click the [~] icon. The camera moves to the preset position and the picture of the camera in that position appears on the monitor.
CLIENT | PROGRAM |
|
|
49