7.Click the search icon.
The smart search data is displayed.
8.Select the channel from the list.
9.You can play the searched data using the play- back control buttons.
Remote Setup Mode
You can set the DVR of a selected site name in the remote setup tab via the network.
Camera / Display Setup
Camera Setting
1.Select a channel for settings.
If you want to block a channel from other users, mark up the convert option. The marked up chan- nels are displayed “Video Loss” on the live win- dows for POWER or NORMAL user.
2.Enter the new channel name.
3.Select input audio channel.
4.Set the PTZ control options.
•Port: Select the connected data port of the
•Control ID: Select the PTZ camera ID from 0 to 255. Make the same settings as the PTZ camera.
•Protocol: Select the protocol supported by PTZ camera.
•Baud Rate: Select the communication speed.(1200, 2400,4800,9600,19200 or 38400)
5.Set the motion options.
•Sensitivity: Set the sensitivity level for the created motion detection area. Sensitivity can be set from 0 to 10.
•Alarm Out: Select the number of the
•Area: Select the desired motion detection area on the preview window screen using the mouse. Click the one point and drag & drop the end point to select the motion area.
Notes:
•If you want to display the grid, mark up the [Show Grid] option.
•If you want to select the entire area, click the [Set All] button or click the [Clear All] button to cancel the selected area.
CLIENT | PROGRAM |
|
|
53