Hitachi 37LD9700C, 32LD9700N Fine Tuning, Sort, Teletext Language, Auto Off, Scart Output

TV SETUP OPERATION (continued)

Setup Menu (TV mode) (continued)

Selected Items				Setup hint
		Auto
	Colour	PAL
	System	SECAM	Select colour system from 5 different modes.
		NTSC4.43
Manual Tuning		NTSC3.58
		Off	It allows you to skip unregistered channels automatically when you
	Skip		use channel up (+) down (-) button to select channels.
		On	This function will automatically skip unavailable channels when set
			to on.
	NR	Off	The noise on the screen or interference could be reduced,
		On	especially at the area of weak electric field.
Fine Tuning		-56~+56	► : Increase the frequency data for the main tuner.
			◄ : Decrease the frequency data for the main tuner.
			You can change the order of channels as follows.
			1. Move the cursor to the Channel row you want to change order
			and then, press OK button.
Sort			2. The colour of the letters on the designated line will be turned
			into yellow bracket and with [ ].
			3. Move the designated row by using		button.
			4. Press OK button to fix the position.
			The most appropriate Teletext Language is automatically selected
			depending on the country which you select in Auto Tuning. In case
			that the text is not displayed correctly, for example, because of
			living near a border, select another area as below.
Teletext Language			West Europe : West European countries and Turkey.
				(This is normal setting for use in Europe.)
			East Europe	: East European countries
			Russian	: Countries neighboring Russia and East European countries
			Farsi	: Middle Eastern countries
		Off	When no airwave has been received and no operation has
Auto Off			been made for 10 minutes in TV mode, it turns to standby mode
		On
			automatically.
		DTT	AV1 (Scart) will be fixed as the selected mode.
			When selecting "Monitor", it is possible to monitor only the
			composite video signal from AV2, AV3, AV4, AV5, TV, or DTT input
Scart Output		TV	that is displayed on the screen at the same time.
			DTT output from scart is only available on 9700 models.
			If "Descrambler" is set to ON when selecting other than DTT, it will
		Monitor
			be fixed as "TV" automatically.

26