Hitachi 37LD9700N, 32LD9700N, 32LD9700U Function Size Switching, DTT/TV/AV1~AV3 signal input

FUNCTION (continued)

Size Switching

ZOOM button

Each time button of the remote control is pressed, the screen display size is switched in sequence, and the status will be displayed at the bottom of the screen.

DTT/TV/AV1~AV3 signal input

	Auto		Full	Zoom			C14:9L	14:9Zoom		Panoramic
Current Output
		Image			Display Size					To display suitable screen as follows.
(Input Signal)
									Play a image with the suitable format by automatically selecting
							Auto		depending on the picture format or programme being broadcast.
									Default Zoom setting in the Function Menu will be selected if WSS
									signal or size switching signal is not detected in DTT, TV and AV mode.
							Full		Play a 4:3 image faithfully in the standard vertical size and horizontally
									squeezed.
		(Squeeze)
							Zoom		Play a 16:9 image in 4:3 screen (Vista size) faithfully. *In some cases,
									slight blanking may remain at the top and bottom.
		(Vista)
									Play a 14:9 image in 16:9 screen, which is expanded vertically and
							C14:9L		squeezed horizontally. This mode is provided for the broadcasting
									programme with WSS code-C14:9L.
	(14:9 Signal)
									Play a 14:9 image in 16:9 screen, which is expanded vertically. This
						14:9Zoom			mode is provided for the broadcasting programme with WSS code-
									14:9Zoom.
	(14:9 Signal)
						Panoramic			Play a 4:3 image which enlarges horizontal and vertical size of the
									middle in equal scales, and displays both sides appearing much wider.
		(4:3 Signal)

52