DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION
Digital Terrestrial Television (DTT) operation is not available on 9600 models.
How to use the On-Screen Display (OSD) system
With the
Basic Operation
MENU
1.Press 
button on the remote control or Menu button on the control panel of the unit. The DTT Main Menu is displayed on the screen as shown on the right.
2.To select the item, press 
button.
The selected item will be highlighted in Yellow.
3.Press OK button to set your selection.
The selected menu page will be displayed on the screen.
4.Use 
button to choose the item on the MENU page. Press OK button to set your selection.
5.Use 
button to adjust the item values or choose options. Press OK button to set your selection.
MENU
6.To exit from the menu, press 
button.
NOTE
The OSD menu screen will be closed automatically when no operation has been made for about one minute.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
<DTT Main Menu>
*This is the example of 32/37LD9700U.
Menu button
SD MEMORY
CARD
About DTT Function
Please note that the DTT function of your television has several differences depending on the model and service of each country. Check the reference page for the details.
Menu / Function | Difference | Page |
1. OSD |
|
|
| For 32/37LD9700C/N, "Channels" appears | 24 |
| in the main menu, and "Channel List" can | 40 |
Channels (Channel List) | be selected from "Channels" menu. For | 42 |
| 32/37LD9700U, "Channel List" appears in the | 43 |
| main menu. | 48 |
Channel Sort | Available only for 32/37LD9700C/N. | 43 |
Country | The preferred country can be selected from | 41 |
"Country" only for 32/37LD9700C/N. |
| |
|
| |
|
|
|
Audio Language | The selectable items from the menu are | 47 |
Subtitle | different. | 47 |
2. Service |
|
|
Receiver Upgrade |
| 49 |
Digital Teletext | Depends on the service of each country. | 44 |
Electric Programme Guide (EPG) | 45 | |
Timer programming |
| 46 |
|
|
|
Menu button
P
P
OK
PH35814
40