Hitachi 37LD9700U TV Setup Operation Setup Menu TV mode, Selected Items Setup hint, Auto Tuning

TV SETUP OPERATION (continued)

Setup Menu (TV mode)

With this menu, you can access various kinds of features relating to TV channel settings.

Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Auto Off	Off
Scart Output	TV
Select OK Set	Return

Selected Items				Setup hint
		( Page 1 )	Select the country where you watch TV so that it starts
		( Page 2 )
	Country		auto-tuning for appropriate channels.
Auto Tuning		( Page 3 )	In case that some of the required channels are missed to
			tune in, set the channels with Manual Tuning Operation.
		( Page 4 )
	Search		Tune the local channels automatically.
			Press OK	button to start searching.
	Position		Press channel up (+) down (-) buttons to input position
			number (1~199, AV00) or channel number (C		or S ).
		CH	Select the channel entry method, and enter the digits for
	Search	S	channel you wish to watch.
			Press OK	button to start searching.
		MHz
		Off	Set this to Off normally. If it is set to On when selecting
			other than DTT in Scart Output, AV1 (Scart) terminal
	Descrambler
		On	operates as TV signal output, and the screen changes to
			display AV1 (Scart) input signal automatically.
Manual Tuning			1. Move the cursor to the first digit and select the letters
			with	button.
	Name		2. Move to the next digit with ► button.
			3. Press	OK button again when you finish inputting all the
			letters.
			The selectable letters are as follows: “0”~“9”, “A”~“Z”, “+”,
			“ ” (blank), “-” (displayed as blank), and “.” (period).
		L
	Sound	L'
		BG	Select the sound system from 5 different modes.
	System
		I
		DK

Information

Use AV00 when connecting equipment such as a VCR via an RF (aerial type) cable.

ENGLISH

25