FUNCTION (continued)
Size Switching (continued)
Position Adjustment
Vertical picture position can be adjusted for Panoramic, Zoom, C14:9L, and 14:9 Zoom mode as follows.
1.Press button while operating the picture size display.
2.“Position” display will appear.
3.Adjust the position by button.
Adjustment range of each picture size are as shown below.
Panoramic: | |
Zoom: | |
C14:9L and 14:9 Zoom: |
*When 1080i/60 component signal is received, it can be adjusted only 0 to +1.
Position + 31
Press▲
Position - 31
Press▼
Vertical Size Adjustment at Panoramic Mode
Whilst displaying a picture except RGB input, the panoramic mode can be switched further between Panoramic 1 and Panoramic 2 with button on the remote control.
By selecting Panoramic 2, the vertical size is reduced so that you can see the whole image, including any subtitles, that might otherwise not be fully visible on the screen.
NOTE
The function does not work when selecting Auto [Panoramic].
54