TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms |
| Check list |
| Page | ||
|
|
|
| |||
No picture | Check if the Power Cord is plugged into the socket firmly. | 19 , | 20 | |||
The Indicating lamp → Off | Check if the Main Power is ON. |
| ||||
|
|
| ||||
|
|
|
| |||
| Check if all the cables of the external equipments are connected |
|
| |||
No picture | correctly and firmly. |
|
|
| ||
Check if the power of the external equipments is ON. |
|
| ||||
The Indicating lamp → Orange | 68 | |||||
Check if the TV/AV mode has been selected correctly. | ||||||
It means that the unit is in “Power Save | ||||||
Check if the PC is in Power Save mode or not. |
|
| ||||
mode”. |
|
| ||||
Refer to “Power Save mode” and “When following messages appears on |
|
| ||||
|
|
| ||||
| the screen”. |
|
|
| ||
|
|
|
| |||
No picture | Check if the signal cable is connected correctly and firmly. | 15 ~ 18 | ||||
The indicating lamp → Green | Adjust the level of Brightness, Contrast and Back Light lower. | |||||
|
| |||||
|
|
|
| |||
The top of the unit and surface of the | It may happen when you use the unit for long hours. Turn off the Main | 73 , | 75 | |||
panel heat up. | Power of the unit for a while. Please note that this is not malfunction. | |||||
|
| |||||
|
|
|
|
| ||
Image cannot be displayed in the correct | Press | button to check if the input signal of the displayed image is | 28 , | 73 , | ||
position. | compatible with the specification of the television. | 75 | ||||
|
|
|
|
|
| |
When the VCR is in special playback | It could happen when the VCR is connected to Component output, such |
|
| |||
features (Fast Forward or Rewind), the |
|
| ||||
as 480i. This is not malfunction. |
|
|
| |||
screen gets dark and cannot see the |
|
|
| |||
Try Composite output or |
|
| ||||
image at all. |
|
| ||||
|
|
|
|
| ||
|
|
|
| |||
| There are some combinations of input signals that the images are not | 57 ~ 59 | ||||
The images are not displayed on sub | displayed on sub pictures. |
| ||||
pictures in “Multi Picture mode” | Please check the Table of | 76 | ||||
| details. |
|
|
|
| |
|
|
|
| |||
| The display size is fixed at “FULL” when the receiving signals are |
|
| |||
Screen display size cannot be switched | 1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz. | 52 ~ 53 | ||||
correctly. | Check the signal status by pressing the | button on the remote | ||||
|
| |||||
| control. |
|
|
|
| |
|
|
|
|
| ||
| Check if the cables are connected correctly. |
|
|
| ||
Cannot be displayed the image from | Check the output format of the equipments. |
| 73 ~ 75 | |||
HDMI 1 or 2. | (Please refer to “Connecting Procedure” and “Recommended Signal | |||||
|
| |||||
| List”.) |
|
|
|
| |
|
|
|
|
|
|
ENGLISH
71