Hitachi 32LD9700U, 32LD9700N, 37LD9700U, 37LD9700C Function Multi Picture Mode, Picture mode

FUNCTION (continued)

Multi Picture Mode

With this feature, you can watch different channels simultaneously on one screen in several ways. As for the available signals, please refer to "Recommended Signal List" on 75 .

• This function is NOT available in HDMI input.

• DTT input: 9700 models only

To activate Multi Picture mode in either DTT, TV, AV, or RGB mode, press button on the remote control.

2-picture mode

You can watch two different pictures side by side.

This mode is available in DTT, TV and AV mode (AV1~5 Input).

Control on the side with Speaker Icon

Audio is output from the selected picture with the speaker icon. You can switch the Input modes (DTT, TV and AV1~5) or change channels only on the side with Speaker icon.

1. To shift the speaker icon, press button.

The speaker icon will be shifted from A to B back-and-forth. The selected picture with speaker icon

2. To change the channel on the selected picture, press	+	button.
	P
	-

3.To select the Input mode on the selected picture, press Input Select buttons on the remote control.

NOTE

In DTT or TV mode, you cannot select the same input channels on both sides simultaneously.

You cannot select the same AV input on both sides simultaneously.

The message “Not Available” will be appeared on the screen when the combinations of the Input modes are not acceptable.

(See the Table below for details.)

5AV1

A B

Table: Mix-and –Match of the Input Modes

Side B	DTT/	AV1	AV2	AV3	AV4	AV5
Side A	TV
DTT/TV	○*	○	○	○	○	○
AV1	○	×	○	○	○	○
AV2	○	○	×	○	○	○
AV3	○	○	○	×	○	○
AV4	○	○	○	○	×	○
AV5	○	○	○	○	○	×

*You can display TV picture on a side and DTT picture on the other side ; however, you cannot select the same input channels on both sides simultaneously in DTT or TV mode.

56