Emerson LC320EMXF owner manual Channel List, Enter

5Channel List

The channels selected here can be skipped when selecting the channels using [CH K/L].

Those channels can still be selected with [the Number buttons].

1 Press [SETUP] to display the main menu.

2 Use [Cursor K/L] to select “CHANNEL”, then press

[ENTER].

3 Use [Cursor K/L] to select “Channel List”, then press [ENTER].

Channell

Autoscan

Channel List

Manual Register

Antenna

4 Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].

Channell Listi

Highlight channels for Ch			DTV	6
Up/Down key selection.				27
			DTV	8
				9
			DTV	48
				58
			DTV	67
Ch Select		Watch/Skip	BACK
	ENTER		Back

•The channel display for the removed channel

darkens. You will not be able to select the channel again using [CH K/L].

•To reactivate a removed channel, use [Cursor K/L] and press [ENTER]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5 Press [SETUP] to exit.

Español	Français	English	INTRODUCTION
5Manual Register
This function lets you add the channels that were not added by
the autoscan due to the receptible condition at the initial setting.			PREPARATION
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select “CHANNEL”, then press
[ENTER].			WATCHING
			TV
3 Use [Cursor K/L] to select “Manual Register”, then			OPTIONAL
press [ENTER].			SETTING
	Channell
	Autoscan
	Channel List
	Manual Register		TROUBLESHOOTING
	Antenna
4 Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].

			INFORMATION
	11
Manuall Registeri
For analog channels, select a		Register
channel to register using number
keys.
For digital channels, you must
perform Autoscan function.
Ch Change	BACK
		Back

5 Press [SETUP] to exit.

Note:

•If setup completes successfully,

“Added to the channel list” is displayed.

•If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

•By using [CH K / L], you can select the memorized channels only.

19

EN