Getting Started
TIP
When working with cables, be sure to connect corresponding outputs and inputs (Video OUT to Video IN, Right Audio OUT to Right Audio IN, etc.). Never connect an IN to an IN or an OUT to an OUT.
OUT 
IN
All A/V jacks and inputs are color coded. Always match the color of the plug to the same color of the jack.
Choose Your Setup
There are several ways to connect your receiver to match your particular equipment setup and to gain optimum signal quality. The basic steps are as follows:
•Connect the satellite dish cable to your receiver.
•Connect the receiver audio and video to your TV or VCR.
•If you connected the receiver to a VCR, connect the VCR to your TV.
•Connect the receiver to a telephone line.
•Plug in all power cords.
The following pages give detailed instructions on the types of connections you can make, depending on the equipment you have, in order to get the best picture and sound quality. Note that the back panels of your TV and other equipment may not exactly match those illustrated.
Connecting Your DIRECTV Receiver to the Satellite Dish
Connect the
10Choose Your Setup