Runco XP-OPAL65, XP-OPAL50 operation manual Level see below, Currently active

Page 63

Operation

Initial VOL level: Select Initial VOL level from the OPTIONS menu to set the desired sound volume level upon power-up.

Press or to set it to On, then use the VOL- or VOL+ () button to set the desired initial volume level. When you do, the volume changes so you can preview your selection before exiting the menu.

Note	You cannot set the Initial VOL level higher than the Maximum VOL
	level (see below).

Maximum VOL level: Select Maximum VOL level from the OPTIONS menu to prevent the sound volume from being set higher than a preferred threshold.

Press or to set it to On, then use the VOL- or VOL+ () button to set the maximum volume level. When you do, the volume changes so you can preview your selection before exiting the menu.

1. If you set the Maximum VOL level lower than the Initial VOL level

Note (see above), the Maximum VOL level is set automatically set equal to the Initial VOL level.

2.The volume display can go up to 63 regardless of the Maximum VOL level setting. However, increasing the volume setting beyond the Maximum VOL level has no effect.

INPUT lock: Select INPUT lock from the OPTIONS menu to allow only the selected input to be displayed and prevent the others from being selected. Set it to Off to allow any input to be selected.

Button lock: This menu option does not currently apply to the CinemaWall.

Remocon User level: Select Remocon User level from the OPTIONS menu to restrict

OSD menu access via the remote control. Choose one of the following:

•Off: No restriction. All remote control buttons are functional.

•User1: Only the POWER, INPUT, RECALL, SURROUND, MUTE, VOL- and VOL+ remote control buttons are functional.

•User2: Only the POWER button is functional.

•User3: Disables the remote control altogether.

Use this feature with caution. Once you select User3, the only Caution way to change it to something other than User3 is via the serial

command OSP:RCM0, OSP:RCM1 or OSP:RCM2. Refer to Serial Communications on page 55 for more information.

Off-timer function: Select Off-timer function from the OPTIONS menu to enable or disable the OFF TIMER () remote control button (see Figure 2-4).

Note	Setting Off-timer function to Disable cancels the Off-timer if it is
	currently active.

CinemaWall Installation/Operation Manual

49

Image 63

Contents XP-65 XP-50Page RuncoCare Standard Features RuncoCare Standard Two Year Limited WarrantyRuncoCare Claim Procedure Page Copyright and Trademarks Important Safety Instructions Declaration of Conformity Compliance InformationFCC Part Page Table of Contents Operation Maintenance and TroubleshootingSpecifications Appendix A. Default SettingsList of Figures List of Figures Xiv Target Audience Carriage return must be used after each command or stringIntroduction About This ManualDegrade performance or cause a malfunction Using This ManualCertain features Significance. They also provide supplemental informationKey Features and Benefits Description, Features and BenefitsOptional Accessories XP-50 and XP-OPAL50 Controls and Indicators Controls and FunctionsCinemaWall at a Glance Display Stand XP-50 / XP-OPAL50 XP-65 / XP-OPAL65 ConnectorsPower Input Surround button CinemaWall Remote ControlControls and Functions Installation Remote ControlOther surfaces Step Procedure For Details, refer to Quick SetupInstallation must be performed by a qualified custom video Installation specialistInstallation Considerations Ventilation Ambient LightOther Considerations Components to Connecting SourceConnections to CinemaWallDVD Analog RGB Connections Connection Connecting External Speakers OptionalConnector Pin Assignments RS-232 ControllerAC Power Connection Turning on the Power Changing the OSD Language Setting the Day and TimeOperation Setting the Computer Display Properties Aspect ratio selection is saved independently for each input Selecting an Input Source Changing the Aspect Ratio149 169Edges of the screen 43 431 linearly scalesSource image horizon Played at the left and rightActivating PIP Swapping the Main PIP Images Using Picture-In-Picture PIPChanging the PIP Window Position Using the On-Screen MenusSelecting a PIP Target Screen or Input SourcePOS./SIZE Options Picture This control is not available when Picture Menu is set to Typical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness POS./SIZE CinemaWall memorizes position and size settings separatelyFrequency is 108 MHz or greater Options menu refer to page 50 is set to OnSound Or 1080p and the Aspect Ratio is set to 169 refer toSET UP Signal Screensaver Is active On the remote control unit, or cycle power to the CinemaWall Order to activate multi-display mode, you must first set Refer to Changing the OSD Language onOn hides joints between displays C D Insert cannot be used when Transparency is set to on Transparency cannot be used when Insert is set to onPresent Time Setup Refer to Setting the Day and Time on Command Timer refer toDVD3 Operation Refer to Return ChangeCurrently active Level see belowPicture menu is set to Warm When using multiple displays such as in a video wall RuncoSome cases, power is transmitted to the slot when MULTI-DISPLAY is activeUsing Digital Zoom During the delay period, the power indicator flashes greenOn page 21, the Clock Display setting has no effect Operation Cleaning the Screen Maintenance and TroubleshootingCleaning Cleaning the Display Panel Body and Remote ControlSymptom Possible Causes Solution Troubleshooting TipsExamples Command 3 bytes Parameter 3 bytesCommand 3 bytes Parameter 6 bytes Serial CommunicationsHex Description Serial CommandsDamzoom IMSPC1 SSCFNC0 VDO VWBGCT-30 Serial Communications CinemaWall Specifications SpecificationsCinemaWall Dimensions 12.31 Supported Timings Supported Signal Timings by Input Specifications Table A-1. Runco Factory Default Settings for CinemaWall Appendix A. Default SettingsDefault Settings Page 020-0970-01 Rev. a September