Controls and Functions
1.IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.ON / OFF
Press to turn the PlasmaWall on or off.
3.ENTER
Press to select a highlighted menu item or confirm a changed setting.
4.Cursor Keys (
, 
, 
, 
)
Use these buttons to select items or settings, adjust settings or switch display patterns.
When no menus are present
UP Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema DOWN Button = Cinema - VirtualWide - Letterbox - 4:3 - 16:9
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:
LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD -
RIGHT Button = Composite -
5.RETURN / EXIT
Press this button to exit the current menu and return to the previous one.
Note | Not all remote control units have this button. If yours does not, use |
the MENU button (see below) to exit the current menu. |
6.LIGHT
Press to illuminate the buttons.
7.MENU
Press this button to show or hide the OSD controls.
8.VIDEO (1)
Press to select Composite video input as the source or to enter the numeric character “1.”
9.COMP (Component) (2)
Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “2.”
PlasmaWall XP Series Owner’s Operating Manual | 13 |