Runco XP-50DHD, XP-50DHDxa, XP-65DHD, XP-65DHDxa, XP-103DHD manual Operation

Page 45

4. Operation

1.Turn on your source components.

2.Press the main power switch on the PlasmaWall (see Figure 2-1, Figure 2-2or Figure 2-3). The standby/on indicator lights green.

3.Set the main power switch at the rear of the DHD Controller (see Figure 2-6)to the “on” position.

4.Press the ON button on the remote control to turn on the DHD Controller and PlasmaWall (or

press the power button on the front of the DHD Controller). The power indicator on the DHD Controller lights solid blue.

5. After a brief warm-up period (approximately 10 seconds), the PlasmaWall will display an image.

To maximize image quality when using the PlasmaWall with a personal computer, you may need to adjust the display properties of your computer’s video card. To do this on a Microsoft® Windows®-based PC:

1.Choose Settings from the Windows Start Menu and click on “Control Panel.”

4.1

Turning on the Power

4.2

Setting the Computer Display Properties

PlasmaWall XP Series Owner’s Operating Manual

33

Image 45

Contents XP-103DHD Page For Plasma Displays Three Year Limited WarrantyRIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC Important Safety Instructions Declaration of Conformity Compliance InformationFCC Part Table of Contents Specifications Maintenance and TroubleshootingOperation Serial CommunicationsList of Figures List of Figures Xii About This Manual IntroductionIf you need Turn to Using This ManualKey Features and Benefits Description, Features and BenefitsOptional Accessories XP-50DHD and XP-50DHDxa Optional Accessories XP-65DHD and XP-65DHDxaOptional Accessories XP-103DHD Controls and Indicators Controls and FunctionsPlasmaWall at a Glance Display Stand PlasmaWall Rear Panel ConnectorsSlot 1 Not used Slot 2 DVI-D or Dual Hdmi input DHD Controller Front PanelController to this input Slot 3 Not used PC in Not used RS-232C 9-pin, male D-SubEnter Button Outputs 1. Hdmi OUT DHD Controller Rear PanelRS-232 Control Port ComLink RS-232 OutputDHD Controller Remote Control DHD Controller Remote ControlCursor Keys On / OFFVideo Comp ComponentAspect Ratio Selection Buttons Memory Preset Buttons16 9 Letbox LetterboxRemote Control InstallationOther surfaces Step Procedure For Details, refer to Quick SetupInstallation Considerations Ventilation Ambient LightVentilation Requirements for Enclosure Mounting XP-103DHD Other Considerations Connecting PlasmaWall to the DHD Controller Connections to the PlasmaWall and DHD ControllerPlasmaWall Rear Panel Connecting the PlasmaWall DVI Version to the DHD Controller RS-232 Connection from the DHD Controller to the PlasmaWall Components to the DHD Connecting SourceHdmi Connections See Figure ControllerDigital DTV RGB Connections Digital DTV RGB Connections See FigurePersonal Computer Analog Computer RGB Connections See FigureDVD Player, VCR Satellite Receiver Laser Disc etc Composite/S-Video/Component Video Connections See FigureRS-232 Controller Connecting 12-VoltConnection Trigger Outputs toReceiver to the DHD Connecting an External IR14. AC Power Connection Connecting AC Power15. Cable Management Operation Turning on the Power Setting the Computer Display PropertiesOperation Input Source Aspect Ratio Using the DHD Controller MenusService Memory PresetsInput Source Aspect RatioInput Source Main MenuAspect Ratio Aspect Ratio 169 Letterbox VirtualWide CinemaRemote Aspect Ratio Control Description Key Aspect Ratio SettingsPicture Brightness Contrast Color Tint Sharpness PictureTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan Input PositionInformation Memory PresetsCalibration Operation Service Input Names Restore Composite Video Component SDShould be used by ISF-certified technicians only Exit PlasmaWall stores any changes you make to these settings HD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUV Operation Cleaning Maintenance and TroubleshootingCleaning the Display Panel Body and Remote Control Cleaning the ScreenSymptom Possible Causes Solution Troubleshooting TipsPlasmaWall Maintenance and Troubleshooting Letterbox Enter Serial CommunicationsCommand Value Description Min/max Stored? Power On/Off CommandsInput Selection Commands Memory Preset Commands Iheight Hdinputres YES Miscellaneous Commands available on all inputsEnter key Command Parameter min/max Value Stored? DescriptionPlasmaWall Specifications SpecificationsDHD Controller Specifications PlasmaWall Dimensions10.0 PlasmaWall Model XP-103DHD Dimensions with Floor Stand Specifications Page Runco CL-810 Owner’s Operating Manual