Runco XP-65DHD manual Aspect Ratio Selection Buttons, 16 9, Letbox Letterbox, Wide VirtualWide

Controls and Functions

10.Aspect Ratio Selection Buttons

Use the red buttons to select an aspect ratio directly or to enter numeric characters, as follows:

16 : 9 (3)

For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.

4 : 3 (6)

Scales the input signal to fit 4:3 display mode in the center of the screen.

LETBOX (Letterbox) (9)

For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.

V-WIDE (VirtualWide)

Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.

CINEMA

For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower portions are masked.

SVC

Not used.

11.S-VID 1 (4) / S-VID 2 (5) (S-Video)

Press to select an S-Video input or to enter the numeric character “4” or “5.”

12.HD 1 (7) / HD 2 (8)

Press to select a HD (RGBHV or YPbPr component) input or to enter the numeric character “7” or “8.”

13.HDMI 1 / HDMI 2 (0)

Press to select a Digital Video input. Press HDMI2 to enter the numeric character “0.”

14.Memory Preset Buttons:

ISF NIGHT

Press to recall settings for the current input from the “ISF Night” memory preset.

ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

CUST 1

Press to recall settings for the current input from the “Custom 1” memory preset.

THX / CUST 2

Press to recall settings for the current input from the “THX” or “Custom 2” memory preset.

14 PlasmaWall XP Series Owner’s Operating Manual