PREPARATION
ADJUSTABLE FEET
Projection angle can be adjusted up to 10.5 degrees with the
ADJUSTABLE FEET.
1 | Lift the front of the projector and pull the FEET LOCK |
| LATCHES in each side of the projector. |
2 | Release the FEET LOCK LATCHES to lock the |
| ADJUSTABLE FEET and rotate the ADJUSTABLE FEET to a |
| proper height, and tilt. |
3 | To retract the ADJUSTABLE FEET, lift the front of the |
| projector and pull and undo the FEET LOCK LATCHES. |
Keystone distortion of the projected image can be corrected by the Menu Operation. (See pages 22, 38.)
ADJUSTABLE FEET | FEET LOCK |
| LATCHES |
INSTALLING PROJECTOR IN PROPER POSITION
Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard.
10˚
Do not tilt the projector more than 10 degrees from side to side.
10˚
Do not put the projector on either side to project an image.
NO SIDEWAYS
20˚
10˚ | 10˚ |
| |||
|
|
|
| 20˚ | |
|
|
|
| ||
When projecting vertically (up or down), keep the projector’s tilt within 10 degrees. Tilting more than 10 degrees in either direction may affect the projector life.
10˚ 10˚
10