BASIC OPERATION
| TURNING OFF THE PROJECTOR |
| |||
1 | Press the POWER |
|
|
|
|
|
|
|
| ||
| the remote control, and “Power off?” appears on the screen. |
|
|
|
|
2 | Press the POWER |
|
|
|
|
|
|
|
| ||
| projector. The LAMP indicator lights bright and the READY |
|
|
|
|
| indicator turns off. After the projector is turned off, the cooling |
|
|
|
|
| fans operate (for 90 seconds). During this “cooling down” |
|
|
|
|
| period, the projector cannot be turned on. | “Power off?” disappears after 4 seconds. |
| ||
3 | When the projector has cooled down, the READY indicator |
|
|
|
|
| lights GREEN again and you can turn projector on. After |
|
|
|
|
cooling down completely, unplug the AC power cord.
TO MAINTAIN THE LIFE OF LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
READY INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING THE
LAMP LIFE.
Note:
•The projector cannot be turned on during the cooling period with the READY indicator turned off. You can turn it on again after the READY indicator becomes GREEN again.
•When the On start function is “On,” this projector is turned on automatically by connecting the AC power cord to an AC outlet. (See page 41 for the On start function.)
•Continuous use may result in shortening the lamp life. Turn off the projector and rest it for about an hour in every 24 hours.
•The running speed of cooling fans is changed according to the temperature inside the projector.
•If the WARNING TEMP indicator blinks RED, see “WARNING TEMP INDICATOR” on page 46.
21