Sanyo PLC-XP57L owner manual TOP Controls and Indicators, Point Volume + / Buttons, Input Button

BEFORE OPERATION

TOP CONTROLS AND INDICATORS

This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.

LAMP REPLACE INDICATOR WARNING TEMP. INDICATOR READY INDICATOR LAMP INDICATOR

Turns to yellow when the projection lamp reaches its end of life.

Blinks yellow when the lamp cannot light up.

(pp.48, 55–56)

Blinks red when the internal temperature of the projector is too high. (pp.46, 55–56)

Lights green when the projector is ready to be turned on. And it blinks green in the Power management mode.

(pp.40, 46, 55–56)

Becomes dim when the projector is turned on. And it becomes bright when the projector is in stand-by mode.

(pp.20, 21, 55-56)

MENU BUTTON

Used to open or close the On-Screen Menu. (pp.18, 19)

ZOOM BUTTON

Used to adjust zoom. (p.22)

FOCUS BUTTON

Used to adjust focus. (p.22)

LENS SHIFT BUTTON

Used to select the Lens

Shift function. (p.22)

POINT (VOLUME + / – ) BUTTONS

Used to select an item or adjust a value in On-Screen Menu. They are also used to pan the image in the DIGITAL ZOOM +/– mode. (p.30)

The POINT LEFT/RIGHT buttons are also used as VOLUME +/– buttons. (p.23)

POWER ON–OFF BUTTON

Used to turn the projector on or off. (pp.20, 21)

INPUT BUTTON

Used to select an input source. (pp.24, 31)

AUTO PC ADJ. BUTTON

Used to operate the Auto PC Adjustment function. (p.26)

IMAGE BUTTON

Used to select the image level.

(pp.29, 33)

SELECT BUTTON

Used to execute the selected item. It is also used to expand/compress the image in the DIGITAL ZOOM mode. (p.30)

17