Sanyo PLC-XP57L owner manual Before Operation, Remote Control Operation, Laser Pointer Function

BEFORE OPERATION

REMOTE CONTROL OPERATION

Left Side

ALL OFF SWITCH

When using the remote control, turn this switch to “ON.” And turn it to “ALL OFF” when it is not in use.

INSIDE THE BATTERY

COMPARTMENT BOX

This Remote Control provides the DIP switches into the battery compartment box.

Slide the SW4 (LASER ON/OFF switch) to the “OFF” position. The Laser Pointer function is not operated.

Set the Switches 1–3 as shown in table below depending on the Code No. that you want to select as the remote control code. (See page 41.)

DIP SWITCH SETTING

		SW4 ........ LASER ON/OFF
		SW1	SW2	SW3	Code No.
	4	ON	ON	ON	Code 1
ON	3	ON	ON	OFF	Code 2
	2	ON	OFF	ON	Code 3
		ON	OFF	OFF	Code 4
	1
		OFF	ON	ON	Code 5
		OFF	ON	OFF	Code 6
		OFF	OFF	ON	Code 7
		OFF	OFF	OFF	Code 8

LASER POINTER

(DRAG ON) INDICATOR

Lights red while the laser beam is emitted from the Laser Light Window.

Lights green when dragged to the “ON” position. (p.45)

MUTE BUTTON

Used to mute the sound. (p.23)

DRAG ON/OFF BUTTON

Used to select the DRAG

ON/OFF position. (p.45)

LEFT CLICK BUTTON

Used as a PC mouse in Wireless Mouse Operation. Press this button and the mouse pointer button to drag the selected screen object. (p.45)

LASER BUTTON

Used to operate the Laser Pointer function. The laser beam is emitted when pressing this button for one minute.

When using the Laser Pointer for more than one minute, release this button and press it again.

FOCUS BUTTON

Used to adjust focus. (p.22)

POWER ON-OFF BUTTON

Used to turn the projector on or off. (p.20, 21)

AUTO PC ADJ. BUTTON

Use to operate the AUTO PC

Adjustment function. (p.26)

IMAGE BUTTON

Used to select the image level. (pp.29, 33)

KEYSTONE BUTTON

Used to correct keystone distortion. (pp.22, 38)

MOUSE POINTER

Used as a PC mouse in Wireless Mouse Operation. (p.45)

RIGHT CLICK BUTTON

Used as a PC mouse in Wireless Mouse Operation. (p.45)

LENS SHIFT BUTTON

Used to select the Lens Shift function. (p.22)

WIRED REMOTE JACK

When using as a Wired Remote Control, connect a remote control cable (not supplied) to this jack.

Battery installation is required when using as a Wired Remote Control.

LASER POINTER FUNCTION

This remote control emits laser beam from the Laser Light Window when used as a Laser Pointer. When the LASER button is pressed, the laser light goes on. When the LASER button is being pressed for more than one minute or it is released, the light goes off. The LASER POINTER INDICATOR lights RED and LASER is emitted with RED light to indicate the laser beam is being emitted.

The Laser emitted is the Cass II laser. Do not look into the Laser Light Window or shine laser beam onto yourself or other people. The three marks shown below are caution labels for the laser beam.

CAUTION: Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure.

These caution labels are put on the remote control.

LASER POINTER INDICATOR

LASER LIGHT WINDOW

15