COMPUTER INPUT
SELECTING INPUT SOURCE
DIRECT OPERATION
Select an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control.
If the projector cannot reproduce proper image, select a correct input source with the MENU OPERATION (see below).
NOTE:
•Input 1 terminal is switchable and can be used as Computer Input or Monitor Output.
| INPUT button | |
|
|
|
✽ | Input 1 | |
|
|
|
|
|
|
| Input 2 | |
|
|
|
Input 3
✽Input 1 is not displayed when the Input 1 is used as Monitor out.
MENU OPERATION
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
1 | Press the MENU button to display the |
| Press the POINT LEFT/RIGHT buttons to move the red frame |
| pointer to the INPUT Menu icon. |
2 | Press the POINT UP/DOWN buttons to move the red arrow |
| pointer to Input 1 and then press the SELECT button. A |
| Source Select Menu appears. |
3 | Move the pointer to a source that you want to select and then |
| press the SELECT button. |
RGB (PC analog)
When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).
RGB (Scart)
When scart video equipment is connected to the INPUT 1 (ANALOG) terminal, select RGB (Scart).
RGB (PC digital)
When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB (PC digital).
RGB (AV HDCP)
If a
Monitor out
If the INPUT 1 ANALOG terminal is being used as a MONITOR OUT terminal, select Monitor out.
NOTE:
•INPUT SOURCE changes if the INPUT 1 button on the remote control is pressed.
•HDCP
INPUT MENU
INPUT Menu icon
Move the pointer (red arrow) to Input 1 and press the SELECT button.
Input 1
Source Select Menu
Move the pointer (red arrow) to a source and press the SELECT button.
24