Runco VX-8D operation manual DHD Controller Rear, Panel, Display Control

Controls and Functions

7.RIGHT BUTTON

Used to direct-select inputs or move the menu cursor right in the OSD. When no menus are present on-screen, the RIGHT button toggles through the different sources, in this order:

Composite Video - S-Video 1 - S-Video 2 - Component - HD 1 - HD 2 - SCART - HDMI 1 - HDMI 2

8.MENU BUTTON

Press the MENU button to bring up the main menu, or to exit the current menu and return to the previous one.

9.UP BUTTON

Use to direct-select aspect ratios or move the menu cursor up in the OSD. When no menus are present on-screen, the UP button toggles through aspect ratios in the following order:

Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9

10.ENTER BUTTON

When an item is highlighted on the OSD, the ENTER button selects the item.

11.STANDBY LED

Lights amber when the DHD Controller is in standby mode; otherwise it is off.

Figure 2-4shows the rear connector panel on the DHD Controller.			2.4
				DHD Controller Rear
				Panel
13	12	3	11		2	10

14 1 4 5 6 7 8 9

Figure 2-4. DHD Controller Rear Panel

1. HDMI Out Outputs Connect this to the DHD Input on the VX-8d (see Figure 2-2).

2.Display Control

Connect this to the RS-232input on the VX-8d, using the provided communication cable.

3.TRIGGERS

Connection for up to three (3), 12-volt trigger-controlled devices such as retractable screens, screen masks or a CineWide with AutoScope system. Output current is limited to 250 milliamperes (mA).

Runco VX-8d Installation/Operation Manual 9