Change the Tempera- ture Scale
Turn Clock Display ON or OFF
Getting Started
The oven has been preset to the Fahrenheit temperature scale. The feature allows you to switch between Fahrenheit and Celsius temperature.
1.Access SELECT FUNCTIONS Menu.
2.Turn knob clockwise until SELECT TEMP
3.Press Start.
4.Turn knob to select Fahrenheit (F) or Celsius (C).
5.Press Start to accept new selection.
Clock time display can be turned off. The default display is on.
1.Access SELECT FUNCTIONS Menu.
2.Turn knob clockwise until CLOCK DISPLAY is displayed.
3.Press START.
4.Turn knob to select ON or OFF
5.Press START to accept new selection.
Access Demo Mode
Change the Display Language
Lock / Unlock the Oven Control Panel
Change the Oven Temperature Offset
Reset the Factory Set- tings
The demo mode is for appliance store use only.
Language choices are English, Spanish, and French. English is the default lan- guage. Note: The SELECT FUNCTIONS menu is displayed in English only, regardless of which language is selected.
1.Access SELECT FUNCTIONS Menu.
2.Turn knob clockwise until desired language is displayed.
3.Press Start.
4.Turn knob clockwise to select a different language.
5.Press Start to accept a language change.
The oven keypad can be locked for safety purposes. This feature can be used to prevent changes to the oven function. This function DOES NOT lock the oven door.
1.Access SELECT FUNCTIONS Menu.
2.Turn knob clockwise until LOCK KEYS is flashing.
3.Press Start. KEY PAD LOCKED is displayed. The display will beep if a key is pressed to indicate that the keypad is locked.
4.To unlock keypads, press Cooking Mode and hold for 5 seconds. Display will read UNLOCKING KEY PAD.
5.When unlocked, the clock will again appear in the display.
This feature allows the adjustment of the oven temperature if food is consistently too brown or too light.
1.Access SELECT FUNCTIONS Menu.
2.Turn knob clockwise until OVEN TEMP OFFSET is displayed.
3.Press START. 0° F is displayed.
4.Turn the knob to the right to increase temperature to +25°F and to the left to decrease to
5.Press START to accept a temperature change.
This feature is used to change all the “Select Functions” settings back to the origi- nal factory settings (or defaults).
1.Access SELECT FUNCTIONS Menu.
2.Turn knob clockwise until RESET DEFAULTS is displayed.
3.Press START. Display reads SELECT FUNCTIONS.
English 14