Winegard WB-2000, WB-2700 operation manual Satellite Interface

(Sold separately, model WB-1100).

3.5.1 Connect Satellite Interface to Primary DirecTV HD Receiver Each DirecTV HD Receiver requires the 110°W HD Converter.

Be sure you have at least 1 converter before you proceed.

Using a mini coax cable provided with the HD Converter, connect “Sat Re- ceiver Out” on the Interface to “To Interface/Dish” on the HD Converter.

Using the other mini coax cable provided with the HD converter, connect “HD CTRL 1” on the Interface to “To Control” on the HD Converter.

Using the mini coax cable provide with the Satellite Interface, connect “To Receiver” on the HD converter to “Satellite In” on the DirecTV HD Receiver.

See Figure 3.7. See Appendix A for a complete wiring diagram.

Figure 3.7

DC IN	DC OUT	COMM. OUT 1	HD
	TO SAT	TO SAT.
	ANTENNA	ANTENNA	CTRL 2
	BLK/RED

HD	FACTORY	SAT.	SAT.
CTRL 1	USE	RECEIVER	ANTENNA
	ONLY	OUT	IN

Satellite Interface

TO INTERFACE/DISH TO CONTROL

HD Converter

	(110°) HD CONVERTER
	MODEL WB-1100
WINEGARD COMPANY • BURLINGTON, IOWA
Made in USA	TO RECEIVER

Primary DirecTV

HD Receiver

SATELLITE IN

If installing a secondary HD receiver, repeat 3.5.1, but connect coax cable from Satellite Antenna to “To Interface/Dish” on second HD Converter. Connect “HD CTRL 2” on the Interface to “To Control” on Converter. Connect “To Receiver” on Converter to “Satellite In” on second HD Receiver.

See Appendix A for a complete wiring diagram.

A secondary stand- ard DirecTV receiver does not require a second HD Converter.

10