Winegard WB-2000, WB-2700 operation manual Exit Sleep Mode, Set Sleep Time

Page 30

Exit Sleep Mode

You may force the antenna into Tracking Mode at any time while the system is in Sleep Mode.

From the Sleep Menu, press [SELECT] to select Exit Sleep Mode.

Satellite Interface

POWER

 

 

Exit Sleep Mode*

SELECT

 

ENTER

 

 

Set Sleep Time

 

 

 

 

 

 

 

Press [ENTER] to confirm.

A confirmation message will appear. The antenna will immediately exit Sleep Mode and enter Tracking Mode.

Set Sleep Time

While in Tracking Mode, if the antenna does not sense movement for a set amount of time, the antenna will automatically exit Tracking Mode and Enter Sleep Mode. The default timer is set to 7 minutes.

From the Sleep Menu, press [SELECT] 2 times to select Set Sleep Time.

Satellite Interface

POWER

 

 

Set Sleep Time*

SELECT

 

ENTER

 

 

Default Sleep

 

 

 

 

 

 

 

Press [ENTER] to confirm.

You will enter the Set Sleep Timer menu. Sleep Timer Range is from 0000-1999, and is measured in seconds. Note: By setting the Sleep Timer to 0000, the Dish will never enter Sleep Mode. The Dish will constantly track the satellite whether stationary or in-motion.

Press [SELECT] to increase selected digit by 1. Press [ENTER] to confirm digit and move to next digit.

Satellite Interface

POWER

 

 

Set Sleep Timer

SELECT

 

ENTER

 

 

0420 seconds

 

 

 

 

 

 

 

After 4th digit is set, press [ENTER] to confirm new time.

You will be prompted to Save Setting. Press [SELECT] to select Yes, then [ENTER] to confirm. A confirmation screen will appear and you will return to the status screen.

Winegard does not recommend setting sleep timer to less than 3 minutes. Your dish may unexpect- edly enter sleep mode, such as at a traffic light or stop sign.

28

Image 30
Contents Winegard Page Congratulations Disclaimer TrademarksTable of Contents Solutions to Common Operating Issues Product Line Model # Service Provider Available SatellitesSystem Overview Parts Provided With HD System 1. HD Satellite Interface BoxPower Button Accessing the Main MenuSatellite Interface Components Hdtv Satellite Interface Installation Safety Tools and Material Required for InstallationSelect a Location to Install the Satellite Interface Red Wire Plug Power Cable into Satellite Interface Black WireConnect Satellite Antenna to Satellite Interface Satellite Interface Connect the Satellite Interface to 110VAC Power Satellite InterfaceInstall Software Update with Clone Box if necessary See FigureConnect Data Cable to Electronics Board and Replace Dome DirecTV Operation DirecTV OverviewPress Enter to confirm Sat Provider Choosing the Satellite Pair Important DirecTV Program Guide and Channel NoteExample of DirecTV Satellite Switching Dish Network Operation Dish Network OverviewConfigure Dish Network Receiver Install the Satellite SwitchDish SW42 Dish SW64Vary Watching Dish Network programmingSatellite 129W Notice Result. See FigureBell ExpressVU Operation Bell ExpressVU OverviewConfigure Bell ExpressVU Receiver Watching Bell ExpressVU programming Satellite Interface Menu Satellite Setup MenuChoose a Satellite Service Provider for Automatic Mode Main MenuManual Mode Returning to Automatic Mode To Operate in Manual ModePress Select to select Manual Mode Enter Sleep Factory DefaultSleep Menu ModeExit Sleep Mode Set Sleep TimeDefault Sleep Diagnostics MenuMenu Option Explanation Configuration Menu Troubleshooting LCD Error MessagesLCD Error Message Cause Solutions Solutions to Common Operating Issues Symptom Winegard HD Satellite Interface Winegard HD Satellite Interface Secondary DirecTV HD Receiver Appendix C. Normal Operating Messages Service Provider Standard Receiver HD ReceiverAppendix B. Recommended Receivers Message Dish Status To ClearSatellite Receiver Warranty