5. Dish Network Operation
5.1 Dish Network Overview
When connected to a Winegard Automatic Satellite System, the Winegard HD satellite Interface is capable of receiving the following satellites automatically:
•Satellite 119°W - Majority of standard programming
•Satellite 110°W - Standard and HD programming
•Satellite 129°W - HD programming only
In Automatic Mode, your Winegard automatic satellite antenna will automatically toggle between the 3 satellites as you change channels on your Dish Network remote control. The toggle feature will work while stationary for all models and
You may also operate the satellite antenna in Manual Mode. You will be able to access ad- ditional available Dish Network satellites, including 61.5°W and 148°W. More information on manual mode is available in Section 7.2.
5.2 Dish Network First Time Setup
Configure Satellite Interface box for Dish Network programming
Press [Power] to power on the Satellite Interface and Satellite Antenna. The antenna will begin it’s search for its
Access the Main Menu. Press and hold the [ENTER] button for 2 seconds.
Press [SELECT] to choose Yes.
Satellite Interface
POWER |
|
| Enter User Menu? | SELECT |
| ENTER | |
|
| *Yes | No |
| |||
|
|
|
|
|
| ||
Press [ENTER] to confirm selection. You are now in the Main Menu. Press [ENTER] to confirm Satellite Setup.
Satellite Interface
POWER |
|
| Satellite Setup* | SELECT |
| ENTER |
|
| Enter Sleep |
| |||
|
|
|
|
|
|
Press [ENTER] to confirm Sat Provider.
From Service Provider menu press [SELECT] to select Dish.
Satellite Interface
POWER |
|
| Service Provider | SELECT |
| ENTER |
|
| *DTV DISH BELL |
| |||
|
|
|
|
|
|
Press [ENTER] to confirm.
Toggle - the dish will automatically move between satellites by changing channels on your remote control.
17