Marantz UD9004 Using an Hdmi Cable to Connect to an AV Amp or Television, About Video Signal

ENGLISH

1. Home Theater Playback – Playing Back Using Multi-channel System –

Using an HDMI Cable to Connect to an AV Amp or Television								Default settings are underlined.
• There are 5 ways to connect (q – t) using HDMI cable (sold separately). Con								Video and Audio Output Signal when Outputting to 2 HDMI Devices
connection for HDMI mode						HDMI MODE button.		(HDMI Auto (Dual) Mode and HDMI Auto (Independent) Mode)
• When connecting with HDMI cable, perform the settings in “Required Settings for HDMI
Connection” (vpage 15).								n About Video Signal
• UD9004 automatically detects audio/video signal supported by the connected HDMI device and								When “About HDMI Video Resolution Setting” (vpage 15) is set to “Auto”, of the resolution
outputs the signal. To change the setting, see “HDMI Setup” on the GUI menu (vpage 25, 26).
								supported by both of the 2 connected devices, the UD9004 outputs the highest resolution video
								signal to both devices.
	HDMI mode					Output signal from each terminal
						HDMI OUT 1	HDMI OUT 2	n About Audio Signal
	q HDMI Auto (Dual)	Used	for	multi-channel
						Video + Audio	Video + Audio	(1) Check audio signals that can be input by the device to be connected.
	(HDMI Dual)	playback using 2 devices.
								• Audio format·
		Used for multi-channel
	w HDMI Auto (Independent)							• Number of channels
		playback using one device				Video + Audio	Video + Audio	(2) About number of output channels of multi-channel audio
	(HDMI Inde.)	and 2-channel playback						When outputting bitstream signals to two HDMI devices, the signals are output to both HDMI devices
		using the other unit. (z1)						if they both support bitstream signals. Of only one device support bit stream, LPCM is output to the
		Used	for	the	highest			device, which does not support bit stream.
	e AV Pure Direct	quality	playback		using			When outputting LPCM signals to two HDMI devices, it is not possible to output multi-channel audio
		different HDMI cables to				Video	Audio	signals with different numbers of channels to the two HDMI devices.
	(AV P.Direct)
		connect video and audio						When the number of channels of multi-channel audio supported by the connected 2 HDMI devices
		separately.						are different, the audio signal output to each mode becomes as follows:
								• HDMI Auto (Dual) :
	r HDMI1	Used for connecting only				Video + Audio	Does not output
								Outputs multi-channel audio of less number of channels to both devices.
	t HDMI2	1 device.				Does not output	Video + Audio
								If the supported number of channels is 7.1 channel and 5.1 channel, respectively, 5.1 channel audio
		Used	when		HDMI
	y HDMI Off					Does not output	Does not output	is output. If the supported number of channels is multi-channel and 2-channel (or 2.1-channel), multi-
		connection is not used.
								channel and 2-channel are output.

Getting Started Connections Setup Playback HDMI Control Function Information

z1 : If the number of channels supported by 2 devices is the same, multi-channel audio is output to both devices.

NOTE

To disable video or audio output from the HDMI terminal, set “Video Out” of “Pure Direct Setup”, which outputs high quality analog audio to “Off”. To enable the HDMI signal output, set the Pure Direct mode to one of the following setting:

• Pure Direct mode “Off” or “User Preset 1” or “User Preset 2” (b) (“Playing Back High-Quality Audio (Pure Direct Function) ” vpage 40)

b Do this after setting “Pure Direct Setup” – “User Preset 1” or “User Preset 2” – “Video Out” on GUI menu to “On” (vpage 30).

•HDMI Auto (Independent) :

Multi-channel audio is output as is to the device, which supports more number of channels. LPCM audio of 2-channel is output to the other device.

We recommend you use this mode when outputting to both an AV Amp and TV.

nAbout Audio Format to be Output

Audio format supported by 2 connected HDMI devices is output.

When multi-channel audio is output, the output channel is as described above (2).

Troubleshooting Speci

13