Getting Started
ENGLISH
Connecting the Power Cord
Connect the included power cord to the UD9004, and plug it into an AC outlet.
Once Connections are Completed
Turning the Power On
Connections Setup
To household power
outlet (AC 120 V, 60 Hz)
Power cord
(included)
NOTE
Press the unit’s POWER ON/STANDBY button or the remote control’s POWER ON/OFF button.
“LOADING” appears on the display, and disc information is read.
b The “NO DISC” message is displayed when a disc is not loaded.
(UD9004)
(Remote control
unit)
Playback HDMI Control Function Information Troubleshooting Speci
• Be sure to insert the power plug . Incomplete connection results in noise generation.
On the GUI menu, when “Other Setup” – “Auto Power Mode” – “On” (vpage 32), the following states are maintained for about 30 minutes, and then the power is turned automatically to standby.
•Disc not loaded
•Playback has stopped
•Stopped due to resume function
nWhen power is switched to standby
Either press POWER ON/STANDBY button on the unit, or press POWER ON/OFF button on the remote control.
The power indicator lights red.
NOTE
During power standby, a slight amount of power is consumed. To totally cut off the power, remove the power cord from the power outlet.
22