ENGLISH
5. Updating to the UD9004’s Latest Software Version
Getting
Connecting to the Network
•You can update by downloading the latest
For more information, on the GUI menu, select “Other Setup” – “Firmware Update” (vpage 33).
•See “Network Setup” (vpage 31) on the GUI menu for more information on network setting.
Internet
Computer
Modem | LAN port/ |
| Ethernet |
| connector |
Router | To WAN port |
|
To LAN port
To LAN port
NETWORK connector
System Requirement
nInternet Connection by Broadband Circuit
nModem
Device that connects to the broadband circuit and conducts communications on the Internet. A type that is integrated with a router is also available.
nRouter
When using the UD9004, we recommend a router with the following features.
•
Function that automatically assigns an IP address on the LAN.
•
nEthernet cable (CAT-5 or greater recommended)
•An Ethernet cable is not included with the UD9004.
•For Ethernet cable, we recommend you use shielded straight cable (normal type). If you use the shielded cable, the noise may adversely affect other devices.
For Internet connection, use an ISP (Internet Service Provider). Ask your local dealer for details.
NOTE
•It is necessary to subscribe to an ISP in order to connect to the Internet. If you already have a broadband connection, there is no need to subscribe anew.
•The router you can use varies with the ISP. For more information, contact your ISP or PC dealer.
•MARANTZ assumes no responsibility whatsoever for any communication errors or troubles resulting from customer's network environment or connected devices.
nOthers
•The UD9004 can use the DHCP function to automatically set the network.
•With the type of circuit in which network setting is performed manually, when subscribed to a provider, conduct the setting in accordance with “Network Setup” on the GUI menu (vpage 31).
•If you connect the UD9004 to a network without a DHCP function, conduct IP address and other settings according to “Network Setup” on the GUI menu (vpage 31).
•The UD9004 does not support PPPoE. If you subscribe to a circuit that is set with PPPoE, a PPPoE- compatible router is required.
•When setting manually, check the setting contents with the network administrator.
Started Connections Setup Playback HDMI Control Function Information Troubleshooting Speci
21