Panasonic AW-RP50N Turn the F2 dial to select AWB, and press, AWB MOD AWB a SET AWB

Page 10
Press the MENU button to light its indicator.

Selecting the settings for a selected remote camera

Automatically adjusting the white balance

Set the automatic adjustment if the coloring appears unnatural under certain light sources or other conditions.

If the white serving as the reference can be recognized, it is possible to shoot with natural coloring.

Memo

When the white balance is adjusted, the R and B GAIN values are set to “±0”.

1 Set the MENU button to ON.

2 Set the PRESET MEMORY/MENU 4 button (AWB/ABB) to ON.

When the button is pressed and its indicator lights, the [AWB/ABB] menu is displayed on the LCD panel.

3 Turn the F1 dial to select the place where the white balance is to be stored.

Select “AWB A” or “AWB B” to select the place where the white balance is stored.

AWB MOD: AWB A

SET : AWB

 This step need not be taken when the AK-HC1500 or AK-HC1800 is used as the remote camera.

4 Turn the F2 dial to select AWB, and press the

F2 dial.

The remote camera now automatically adjusts the white balance, and registers it at the place selected in step 3.

When automatic adjustment is performed, the following details are displayed on the LCD panel.

AWB ACTIVE:

This appears while AWB is being executed.

AWB OK:

This appears for 3 seconds after AWB is completed successfully.

AWB NG:

This appears for 3 seconds after AWB is completed unsuccessfully.

(AWB was executed while ATW, 3200K or 5600K was selected.)

 If it was not possible to adjust the white balance properly, change the brightness, iris, subject, light source or other aspect, and try adjusting it again.

Note

The settings will differ depending on the remote camera connected.

For further details, check the Operating Instructions of the model concerned.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operating Instructions Contents Before use How to turn the power of the remote cameras on and off How to turn the power of the remote cameras onTurn the F2 dial to select OFF, and press How to turn the power of the remote cameras offCAM Power Group OFF Turn the F2 dial to select ALL OFF, and press the F2 dialPreset number Number Setting and operating the preset memoriesPreset numbers and registered pages  Memo PRESET1 Executing the preset dataDeleting the preset memory data PAGE1Setting the gain Selecting the settings for a selected remote cameraSetting the pedestal Turn the F1 dial to select the white balance mode Setting the white balanceSet the Preset MEMORY/MENU 4 button AWB/ABB to on Selecting the white balance modeTurn the F2 dial to select AWB, and press Automatically adjusting the white balanceAWB MOD AWB a SET AWB Rgain Set the Preset MEMORY/MENU 2 button R/BGAIN to onTurn the F1 dial to select ATW BgainSet the Preset MEMORY/MENU 3 button R/BPED to on Setting the black balanceTurn the F2 dial to select ABB, and press Set the Preset MEMORY/MENU 5 button Shutter to on Setting the shutter speedSetting the detail Turn the F1 dial to select the shutter modeTurn the F1 dial to select the shooting mode Setting the shooting modeSet the Preset MEMORY/MENU 7 button SCENE/MODE to on Specifying the color barsTable of operations Operating the menu items of the selected remote cameraRemote camera Menu ON/OFF Dial operation Menu operation Set the Preset MEMORY/MENU 9 button Setup to on Setting the User buttonsRegistering functions User buttons Tally OUT Tally settings3TALLY OffSetting the functions Turn the F1 dial to select the target menu itemZoom DIR Normal Setting the remote camera operationsFocus DIR Normal FOCUS/IRIS Standard Setting the PAN/TILT lever inclination and speedSelecting the control items pan, tilt, zoom and focus Speed TargetReturning the remote cameras to their home position Scope Mode aMode Operations performed Diag SpeedWhen the AW-HE50 is used Setting the upper limitSetting the lower limit When any other remote camera is usedSetting the left limit Setting the right limit6FUNCTION Exercising external control over the preset memory data Adjusting the minimum lens zoom start speedPreset CTL1 Locking the button operations Adjusting the LCD panel backlightMenu Control Enable 9LCD BLSet Preset MEMORY/MENU 10 button System to on Setting linkup with the switcherSwitcher network settings Press the Exit buttonSwlink Off Link setting2SW Link Swlink OnTurn the F1 dial to select the input line of the switcher Setting the image output and image input4SW Assign Turn the F1 dial to select the menu item to be set Switcher settingsBuscont Off Bus switching Buscont OffCamsel Off BUS AUXFasist Off T Lever Tallyip OffSelf Together Setting for the information to be displayed on the OSDSetting all the information displays Turn the F1 dial to and select the menu item to be setSetting each information item to be displayed 10ALARM Checking the equipment alarm informationSelect Power Select CAM1 to CAM100Press the F2 dial to initialize the settings Turn the F2 dial to select the initializing modeReturning the unit to its factory status Example of GPI OUT connections Control interface for external devicesSub 15-pin, female, inch thread Current Max mA AW-RP50Installing the software Setup SoftwareIP settings Displaying the Setting tab Changing the camera numbers Auto IP settingChanging the IP addresses Initializing the IP addressesSaving and loading data Loading the setting filesSaving the setting files Saving the log filesReferencing the network environment Enter the IP addresses in the AW-RP50 IP Address boxes0dB to 12dB 1 step Button Menu item Control device Initial value SettingTable of menu items AW-HE50Video Buscont Option AW-HE50 Display only F0610Y1070 D
Related manuals
Manual 82 pages 17 Kb

AW-RP50N specifications

The Panasonic AW-RP50N is a sophisticated remote camera controller designed for professional video production environments. Renowned for its advanced features and versatility, the AW-RP50N serves as an essential tool for operators needing precise control over multiple cameras in real-time.

One of the standout characteristics of the AW-RP50N is its ability to control up to 200 Panasonic cameras simultaneously. This feature is particularly beneficial in large-scale productions, such as broadcasting events, live concerts, and sports. It not only enhances operational efficiency but also provides cinematographers with a centralized point for camera management.

The AW-RP50N boasts a user-friendly interface, equipped with a large LCD touch panel that allows easy navigation and adjustment of camera settings. The intuitive layout makes it simple for operators to switch between camera feeds, adjust PTZ (pan-tilt-zoom) settings, and monitor video feeds without interruption. Customizable settings enable users to tailor the interface to suit their workflow preferences.

In terms of technology, the AW-RP50N supports multiple communication protocols, including IP (Internet Protocol) and serial communication. This flexibility allows integration with various camera models and third-party systems, offering a cohesive control experience. The unit is designed with robustness in mind, ensuring reliability even in demanding environments.

The AW-RP50N features advanced zoom and focus controls, providing smooth and precise movements essential for capturing high-quality video content. With programmable presets, operators can save specific camera angles and settings, making it easy to quickly switch back to preferred positions during production.

Additionally, it supports HD/SD video formats, catering to diverse production needs. The unit's compact design also makes it an ideal choice for mobile setups and small production teams that require portability without sacrificing performance.

Overall, the Panasonic AW-RP50N remote camera controller is a remarkable piece of technology, combining scalability, ease of use, and high-performance capabilities. Its robust feature set makes it an indispensable asset for professionals in the broadcasting and production industry, ensuring dynamic and reliable control of remote cameras in any situation. Whether scaling a large production or managing a small shoot, the AW-RP50N enables creators to achieve their artistic vision with precision and ease.
Top Page Image Contents