Panasonic AW-RP50N Adjusting the minimum lens zoom start speed, Preset CTL1

Page 25

Setting the functions

Adjusting the minimum lens zoom start speed

This adjustment ensures that the lens zoom will start moving smoothly in line with the inclination of the ZOOM button when operating the lens zoom using the ZOOM button.

From the [SETUP] menu, select [PTZ ADJ] and display [Z MIN SPEED]. Then turn the F2 dial to set the compensation amount.

1.Z MIN SPEED Off

The lowest compensation amount is “1”, and the highest is “8”.

No compensation is provided at the “Off” setting.

While observing the images on a monitor, hold down the ZOOM button slowly, and check whether the lens zoom starts moving smoothly.

Exercising external control over the preset memory data

Preset numbers can be assigned to execute presets for the selected remote cameras when signals have been input to the TALLY/GPI input/output connector.

The presets are assigned using the GPI item on the [SETUP] menu.

[8]GPI

Setting the preset numbers

From the [SETUP] menu, select [GPI], and display [PRESET CTL1], [PRESET CTL2] or [PRESET CTL3]. Then set the camera number and preset number.

1.PRESET CTL1 ▼

CAM100 PRE100

Any camera number from “CAM1” to “CAM100” or “ALL” can be selected.

 If “ALL” has been selected, it will not be possible to execute the preset operations for any remote cameras which have been set to “NoAsign” as the connection setting.

Refer to “Settings for connection with the remote cameras” (<Basics> Operating Instructions).

The preset number setting can be established for each GPI input.

Input1: PRESET CTL1

Input2: PRESET CTL2

Input3: PRESET CTL3

25

Image 25
Contents Operating Instructions Contents Before use How to turn the power of the remote cameras on How to turn the power of the remote cameras on and offCAM Power Group OFF How to turn the power of the remote cameras offTurn the F2 dial to select OFF, and press Turn the F2 dial to select ALL OFF, and press the F2 dialPreset numbers and registered pages Setting and operating the preset memoriesPreset number Number  Memo Deleting the preset memory data Executing the preset dataPRESET1 PAGE1Setting the gain Selecting the settings for a selected remote cameraSetting the pedestal Set the Preset MEMORY/MENU 4 button AWB/ABB to on Setting the white balanceTurn the F1 dial to select the white balance mode Selecting the white balance modeTurn the F2 dial to select AWB, and press Automatically adjusting the white balanceAWB MOD AWB a SET AWB Turn the F1 dial to select ATW Set the Preset MEMORY/MENU 2 button R/BGAIN to onRgain BgainSet the Preset MEMORY/MENU 3 button R/BPED to on Setting the black balanceTurn the F2 dial to select ABB, and press Setting the detail Setting the shutter speedSet the Preset MEMORY/MENU 5 button Shutter to on Turn the F1 dial to select the shutter modeSet the Preset MEMORY/MENU 7 button SCENE/MODE to on Setting the shooting modeTurn the F1 dial to select the shooting mode Specifying the color barsTable of operations Operating the menu items of the selected remote cameraRemote camera Menu ON/OFF Dial operation Menu operation Set the Preset MEMORY/MENU 9 button Setup to on Setting the User buttonsRegistering functions User buttons 3TALLY Tally settingsTally OUT OffTurn the F1 dial to select the target menu item Setting the functionsZoom DIR Normal Setting the remote camera operationsFocus DIR Normal Selecting the control items pan, tilt, zoom and focus Setting the PAN/TILT lever inclination and speedFOCUS/IRIS Standard Speed TargetMode Operations performed Scope Mode aReturning the remote cameras to their home position Diag SpeedSetting the lower limit Setting the upper limitWhen the AW-HE50 is used When any other remote camera is usedSetting the right limit Setting the left limit6FUNCTION Exercising external control over the preset memory data Adjusting the minimum lens zoom start speedPreset CTL1 Menu Control Enable Adjusting the LCD panel backlightLocking the button operations 9LCD BLSwitcher network settings Setting linkup with the switcherSet Preset MEMORY/MENU 10 button System to on Press the Exit button2SW Link Link settingSwlink Off Swlink OnTurn the F1 dial to select the input line of the switcher Setting the image output and image input4SW Assign Buscont Off Bus switching Switcher settingsTurn the F1 dial to select the menu item to be set Buscont OffCamsel Off BUS AUXFasist Off T Lever Tallyip OffSelf Setting all the information displays Setting for the information to be displayed on the OSDTogether Turn the F1 dial to and select the menu item to be setSetting each information item to be displayed Select Power Checking the equipment alarm information10ALARM Select CAM1 to CAM100Press the F2 dial to initialize the settings Turn the F2 dial to select the initializing modeReturning the unit to its factory status Sub 15-pin, female, inch thread Control interface for external devicesExample of GPI OUT connections Current Max mA AW-RP50Installing the software Setup SoftwareIP settings Displaying the Setting tab Changing the IP addresses Auto IP settingChanging the camera numbers Initializing the IP addressesSaving the setting files Loading the setting filesSaving and loading data Saving the log filesEnter the IP addresses in the AW-RP50 IP Address boxes Referencing the network environmentTable of menu items Button Menu item Control device Initial value Setting0dB to 12dB 1 step AW-HE50Video Buscont Option AW-HE50 Display only F0610Y1070 D
Related manuals
Manual 82 pages 17 Kb

AW-RP50N specifications

The Panasonic AW-RP50N is a sophisticated remote camera controller designed for professional video production environments. Renowned for its advanced features and versatility, the AW-RP50N serves as an essential tool for operators needing precise control over multiple cameras in real-time.

One of the standout characteristics of the AW-RP50N is its ability to control up to 200 Panasonic cameras simultaneously. This feature is particularly beneficial in large-scale productions, such as broadcasting events, live concerts, and sports. It not only enhances operational efficiency but also provides cinematographers with a centralized point for camera management.

The AW-RP50N boasts a user-friendly interface, equipped with a large LCD touch panel that allows easy navigation and adjustment of camera settings. The intuitive layout makes it simple for operators to switch between camera feeds, adjust PTZ (pan-tilt-zoom) settings, and monitor video feeds without interruption. Customizable settings enable users to tailor the interface to suit their workflow preferences.

In terms of technology, the AW-RP50N supports multiple communication protocols, including IP (Internet Protocol) and serial communication. This flexibility allows integration with various camera models and third-party systems, offering a cohesive control experience. The unit is designed with robustness in mind, ensuring reliability even in demanding environments.

The AW-RP50N features advanced zoom and focus controls, providing smooth and precise movements essential for capturing high-quality video content. With programmable presets, operators can save specific camera angles and settings, making it easy to quickly switch back to preferred positions during production.

Additionally, it supports HD/SD video formats, catering to diverse production needs. The unit's compact design also makes it an ideal choice for mobile setups and small production teams that require portability without sacrificing performance.

Overall, the Panasonic AW-RP50N remote camera controller is a remarkable piece of technology, combining scalability, ease of use, and high-performance capabilities. Its robust feature set makes it an indispensable asset for professionals in the broadcasting and production industry, ensuring dynamic and reliable control of remote cameras in any situation. Whether scaling a large production or managing a small shoot, the AW-RP50N enables creators to achieve their artistic vision with precision and ease.