Panasonic AW-RP50N Setting the upper limit, Setting the lower limit, When the AW-HE50 is used

Page 22

Setting the functions

Setting the movement range of the remote camera (limiter function)

This unit has a limiter function which is a function that limits the movement range of the remote cameras.

There are four limiter positions: the upper, lower, left and right limits of the movement range.

When the AW-HE50 is used:

Depending on the nature of the AW-HE50’s installation location, there may be some subjects inside its movement range which it is not desirable or necessary to shoot.

In cases like this, the shooting range of the AW-HE50 can be limited by setting limiters in front of those subjects which are not to be shot.

When any other remote camera is used:

Depending on the installation position, there may be an obstruction in the movement range, and the remote cameras may come into contact with this obstruction.

If the remote cameras come into contact with an obstruction, trouble or accidents may result.

In cases like this, a limiter can be set in front of the obstruction to prevent contact.

Setting the upper limit

From the [SETUP] menu, select [PTZ ADJ] and display [LIMIT UP]. Then set the upper limit.

The setting that is displayed differs between the AW-HE50 and other remote cameras.

Display that appears with the AW-HE50

The current setting status is displayed in the LIMIT UP item.

2.LIMIT UP Off

Turn the F2 dial, and then press it.

2.LIMIT UP On

Display that appears with other remote cameras

The setting status is displayed after the completion of the setting in the LIMIT UP item.

2.LIMIT UP

EXEC

Press the F2 dial.

2.LIMIT UP

LIMIT ON

Setting the lower limit

From the [SETUP] menu, select [PTZ ADJ] and display [LIMIT DOWN]. Then set the lower limit.

The setting that is displayed differs between the AW-HE50 and other remote cameras.

Display that appears with the AW-HE50

The current setting status is displayed in the LIMIT DOWN item.

3.LIMIT DOWN Off

Turn the F2 dial, and then press it.

3.LIMIT DOWN On

Display that appears with other remote cameras

The setting status is displayed after the completion of the setting in the LIMIT DOWN item.

3.LIMIT DOWN EXEC

Press the F2 dial.

3.LIMIT DOWN LIMIT ON

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Operating Instructions Contents Before use How to turn the power of the remote cameras on and off How to turn the power of the remote cameras onTurn the F2 dial to select OFF, and press How to turn the power of the remote cameras offCAM Power Group OFF Turn the F2 dial to select ALL OFF, and press the F2 dialPreset number Number Setting and operating the preset memoriesPreset numbers and registered pages  Memo PRESET1 Executing the preset dataDeleting the preset memory data PAGE1Setting the gain Selecting the settings for a selected remote cameraSetting the pedestal Turn the F1 dial to select the white balance mode Setting the white balanceSet the Preset MEMORY/MENU 4 button AWB/ABB to on Selecting the white balance modeTurn the F2 dial to select AWB, and press Automatically adjusting the white balanceAWB MOD AWB a SET AWB Rgain Set the Preset MEMORY/MENU 2 button R/BGAIN to onTurn the F1 dial to select ATW BgainSet the Preset MEMORY/MENU 3 button R/BPED to on Setting the black balanceTurn the F2 dial to select ABB, and press Set the Preset MEMORY/MENU 5 button Shutter to on Setting the shutter speedSetting the detail Turn the F1 dial to select the shutter modeTurn the F1 dial to select the shooting mode Setting the shooting modeSet the Preset MEMORY/MENU 7 button SCENE/MODE to on Specifying the color barsTable of operations Operating the menu items of the selected remote cameraRemote camera Menu ON/OFF Dial operation Menu operation Set the Preset MEMORY/MENU 9 button Setup to on Setting the User buttonsRegistering functions User buttons Tally OUT Tally settings3TALLY OffSetting the functions Turn the F1 dial to select the target menu itemZoom DIR Normal Setting the remote camera operationsFocus DIR Normal FOCUS/IRIS Standard Setting the PAN/TILT lever inclination and speedSelecting the control items pan, tilt, zoom and focus Speed TargetReturning the remote cameras to their home position Scope Mode aMode Operations performed Diag SpeedWhen the AW-HE50 is used Setting the upper limitSetting the lower limit When any other remote camera is usedSetting the left limit Setting the right limit6FUNCTION Exercising external control over the preset memory data Adjusting the minimum lens zoom start speedPreset CTL1 Locking the button operations Adjusting the LCD panel backlightMenu Control Enable 9LCD BLSet Preset MEMORY/MENU 10 button System to on Setting linkup with the switcherSwitcher network settings Press the Exit buttonSwlink Off Link setting2SW Link Swlink OnTurn the F1 dial to select the input line of the switcher Setting the image output and image input4SW Assign Turn the F1 dial to select the menu item to be set Switcher settingsBuscont Off Bus switching Buscont OffCamsel Off BUS AUXFasist Off T Lever Tallyip OffSelf Together Setting for the information to be displayed on the OSDSetting all the information displays Turn the F1 dial to and select the menu item to be setSetting each information item to be displayed 10ALARM Checking the equipment alarm informationSelect Power Select CAM1 to CAM100Press the F2 dial to initialize the settings Turn the F2 dial to select the initializing modeReturning the unit to its factory status Example of GPI OUT connections Control interface for external devicesSub 15-pin, female, inch thread Current Max mA AW-RP50Installing the software Setup SoftwareIP settings Displaying the Setting tab Changing the camera numbers Auto IP settingChanging the IP addresses Initializing the IP addressesSaving and loading data Loading the setting filesSaving the setting files Saving the log filesReferencing the network environment Enter the IP addresses in the AW-RP50 IP Address boxes0dB to 12dB 1 step Button Menu item Control device Initial value SettingTable of menu items AW-HE50Video Buscont Option AW-HE50 Display only F0610Y1070 D
Related manuals
Manual 82 pages 17 Kb

AW-RP50N specifications

The Panasonic AW-RP50N is a sophisticated remote camera controller designed for professional video production environments. Renowned for its advanced features and versatility, the AW-RP50N serves as an essential tool for operators needing precise control over multiple cameras in real-time.

One of the standout characteristics of the AW-RP50N is its ability to control up to 200 Panasonic cameras simultaneously. This feature is particularly beneficial in large-scale productions, such as broadcasting events, live concerts, and sports. It not only enhances operational efficiency but also provides cinematographers with a centralized point for camera management.

The AW-RP50N boasts a user-friendly interface, equipped with a large LCD touch panel that allows easy navigation and adjustment of camera settings. The intuitive layout makes it simple for operators to switch between camera feeds, adjust PTZ (pan-tilt-zoom) settings, and monitor video feeds without interruption. Customizable settings enable users to tailor the interface to suit their workflow preferences.

In terms of technology, the AW-RP50N supports multiple communication protocols, including IP (Internet Protocol) and serial communication. This flexibility allows integration with various camera models and third-party systems, offering a cohesive control experience. The unit is designed with robustness in mind, ensuring reliability even in demanding environments.

The AW-RP50N features advanced zoom and focus controls, providing smooth and precise movements essential for capturing high-quality video content. With programmable presets, operators can save specific camera angles and settings, making it easy to quickly switch back to preferred positions during production.

Additionally, it supports HD/SD video formats, catering to diverse production needs. The unit's compact design also makes it an ideal choice for mobile setups and small production teams that require portability without sacrificing performance.

Overall, the Panasonic AW-RP50N remote camera controller is a remarkable piece of technology, combining scalability, ease of use, and high-performance capabilities. Its robust feature set makes it an indispensable asset for professionals in the broadcasting and production industry, ensuring dynamic and reliable control of remote cameras in any situation. Whether scaling a large production or managing a small shoot, the AW-RP50N enables creators to achieve their artistic vision with precision and ease.
Top Page Image Contents