Panasonic AW-RP50N Setting for the information to be displayed on the OSD, Together, 3SW Disp

Page 33
Press the MENU button to light its indicator.

Setting the functions when the unit is linked with the switcher

Setting for the information to be displayed on the OSD

This setting displays the remote camera information on the OSD of the monitor which is connected to the switcher to be linked to the unit.

The setting is established using the [SETUP] menu.

Before taking the steps here, the steps for “Switcher network settings” and “Setting the image output and image input” described earlier must be taken.

First, the basic menu operations will be described.

5 Turn the F2 dial to select On or Off, and then press the F2 dial to enter the selection.

2.FORMAT Off

Turn the F2 dial, and then press it.

2.FORMAT On

Setting all the information displays

1 Set the MENU button to ON.

2 Set PRESET MEMORY/MENU 9 button (SETUP) to ON.

When the button is pressed and its indicator is lighted, the [SETUP] menu is displayed on the LCD panel.

[1]USER ▼

3 Turn the F1 dial to display the SW DISP menu, and press the F1 dial.

[3]SW DISP

Press the F1 dial.

1.CAMINF ▼ Off

4 Turn the F1 dial to and select the menu item to be set.

1.CAMINF ▼ Off

Turn the F1 dial.

2.FORMAT Off

together

From the [SETUP] menu, select [SW DISP] and display [CAMINF]. Then set On or Off.

1.CAMINF ▼ Off

When “On” is selected as the item setting, the information of the remote cameras set in “Setting the image output and image input” is sent to the switcher.

Control can also be exercised by assigning this setting to a USER button.

Video format

(This is left blank when the video format of the remote camera cannot be recognized.)

Scene file name (shooting mode) Filter information

Remote camera alarm information

Shutter information (ON/OFF, shutter value) Gain value

Iris value

Remote camera name (displayed with up to 10 characters)

,

1080/59i USER

1/100AUTO

AW-HE50

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Operating Instructions Contents Before use How to turn the power of the remote cameras on How to turn the power of the remote cameras on and offCAM Power Group OFF How to turn the power of the remote cameras offTurn the F2 dial to select OFF, and press Turn the F2 dial to select ALL OFF, and press the F2 dialPreset numbers and registered pages Setting and operating the preset memoriesPreset number Number  Memo Deleting the preset memory data Executing the preset dataPRESET1 PAGE1Selecting the settings for a selected remote camera Setting the gainSetting the pedestal Set the Preset MEMORY/MENU 4 button AWB/ABB to on Setting the white balanceTurn the F1 dial to select the white balance mode Selecting the white balance modeAutomatically adjusting the white balance Turn the F2 dial to select AWB, and pressAWB MOD AWB a SET AWB Turn the F1 dial to select ATW Set the Preset MEMORY/MENU 2 button R/BGAIN to onRgain BgainSetting the black balance Set the Preset MEMORY/MENU 3 button R/BPED to onTurn the F2 dial to select ABB, and press Setting the detail Setting the shutter speedSet the Preset MEMORY/MENU 5 button Shutter to on Turn the F1 dial to select the shutter modeSet the Preset MEMORY/MENU 7 button SCENE/MODE to on Setting the shooting modeTurn the F1 dial to select the shooting mode Specifying the color barsOperating the menu items of the selected remote camera Table of operationsRemote camera Menu ON/OFF Dial operation Menu operation Setting the User buttons Set the Preset MEMORY/MENU 9 button Setup to onRegistering functions User buttons 3TALLY Tally settingsTally OUT OffTurn the F1 dial to select the target menu item Setting the functionsSetting the remote camera operations Zoom DIR NormalFocus DIR Normal Selecting the control items pan, tilt, zoom and focus Setting the PAN/TILT lever inclination and speedFOCUS/IRIS Standard Speed TargetMode Operations performed Scope Mode aReturning the remote cameras to their home position Diag SpeedSetting the lower limit Setting the upper limitWhen the AW-HE50 is used When any other remote camera is usedSetting the right limit Setting the left limit6FUNCTION Adjusting the minimum lens zoom start speed Exercising external control over the preset memory dataPreset CTL1 Menu Control Enable Adjusting the LCD panel backlightLocking the button operations 9LCD BLSwitcher network settings Setting linkup with the switcherSet Preset MEMORY/MENU 10 button System to on Press the Exit button2SW Link Link settingSwlink Off Swlink OnSetting the image output and image input Turn the F1 dial to select the input line of the switcher4SW Assign Buscont Off Bus switching Switcher settingsTurn the F1 dial to select the menu item to be set Buscont OffBUS AUX Camsel OffFasist Off Tallyip Off T LeverSelf Setting all the information displays Setting for the information to be displayed on the OSDTogether Turn the F1 dial to and select the menu item to be setSetting each information item to be displayed Select Power Checking the equipment alarm information10ALARM Select CAM1 to CAM100Turn the F2 dial to select the initializing mode Press the F2 dial to initialize the settingsReturning the unit to its factory status Sub 15-pin, female, inch thread Control interface for external devicesExample of GPI OUT connections Current Max mA AW-RP50Setup Software Installing the softwareIP settings Displaying the Setting tab Changing the IP addresses Auto IP settingChanging the camera numbers Initializing the IP addressesSaving the setting files Loading the setting filesSaving and loading data Saving the log filesEnter the IP addresses in the AW-RP50 IP Address boxes Referencing the network environmentTable of menu items Button Menu item Control device Initial value Setting0dB to 12dB 1 step AW-HE50Video Buscont Option AW-HE50 Display only F0610Y1070 D
Related manuals
Manual 82 pages 17 Kb

AW-RP50N specifications

The Panasonic AW-RP50N is a sophisticated remote camera controller designed for professional video production environments. Renowned for its advanced features and versatility, the AW-RP50N serves as an essential tool for operators needing precise control over multiple cameras in real-time.

One of the standout characteristics of the AW-RP50N is its ability to control up to 200 Panasonic cameras simultaneously. This feature is particularly beneficial in large-scale productions, such as broadcasting events, live concerts, and sports. It not only enhances operational efficiency but also provides cinematographers with a centralized point for camera management.

The AW-RP50N boasts a user-friendly interface, equipped with a large LCD touch panel that allows easy navigation and adjustment of camera settings. The intuitive layout makes it simple for operators to switch between camera feeds, adjust PTZ (pan-tilt-zoom) settings, and monitor video feeds without interruption. Customizable settings enable users to tailor the interface to suit their workflow preferences.

In terms of technology, the AW-RP50N supports multiple communication protocols, including IP (Internet Protocol) and serial communication. This flexibility allows integration with various camera models and third-party systems, offering a cohesive control experience. The unit is designed with robustness in mind, ensuring reliability even in demanding environments.

The AW-RP50N features advanced zoom and focus controls, providing smooth and precise movements essential for capturing high-quality video content. With programmable presets, operators can save specific camera angles and settings, making it easy to quickly switch back to preferred positions during production.

Additionally, it supports HD/SD video formats, catering to diverse production needs. The unit's compact design also makes it an ideal choice for mobile setups and small production teams that require portability without sacrificing performance.

Overall, the Panasonic AW-RP50N remote camera controller is a remarkable piece of technology, combining scalability, ease of use, and high-performance capabilities. Its robust feature set makes it an indispensable asset for professionals in the broadcasting and production industry, ensuring dynamic and reliable control of remote cameras in any situation. Whether scaling a large production or managing a small shoot, the AW-RP50N enables creators to achieve their artistic vision with precision and ease.
Top Page Image Contents