SETTING UP THE VCR
CHANGING THE SIGNAL TYPE
This feature is useful if the cable signal goes out; you can switch to Antenna for alternate television viewing.
1.Press MENU to display the VCR MAIN MENU.
2.Press 4 to display the CHANNELS menu.
3.Press 3 to change the Signal Type between Cable and Antenna. When you are finished, press 0 to exit back to the main menu and 0 again to exit to normal viewing.
ADDING OR REMOVING CHANNELS
You may want to add or remove channels after you Auto Channel Search, especially if some of the channels have weak signals or you don’t want to watch them.
1.Press MENU to display the VCR MAIN MENU.
2.Press 4 to display the CHANNELS menu.
3.Press 2 to display the ADD/REMOVE CHANNELS screen. Use CHANNEL up or down or number buttons to go to the channel you want to remove or add.
ADD/REMOVE CHANNELS
Channel 115
is presently ADDED
Press CLEAR to remove Press MENU to exit
ADD/REMOVE CHANNELS
Channel 115
is presently REMOVED
Press INFO to add Press MENU to exit
Selecting Channels
4.When at the channel, it will be added if not already on the list or deleted if it was. If the channel was added, you can press CLEAR to remove it. If the channel was deleted, you can press INFO to add.
TIME AND DATE
The VCR gives you two ways to set the time and date. The Auto Clock feature which enables the VCR to update the clock each time you turn off the VCR. The Auto Clock feature is advantageous because it updates the time for you automatically. The second way is entering the time and date manually via the menu system.
The CHANNEL + and - buttons access those channels which are active in your VCR channel list.
You can still access channels not in the channel list by using the number buttons on the remote.
14