RECORDING
3.Enter the PlusCode® programming number shown in your local television programming guide.
VCR PLUS+
Enter PlusCode Number (from TV listing)
12876
Press CLEAR to correct
Press MENU when done
(Screen shown is just an example).
4. Press MENU after entering the number.
How often should this program record?
1 One time
2 Daily (every day)
3 Weekdays
4 Weekly (once per week)
0Cancel
5.Indicate how often you want the program to be recorded.
Program 1 (One time)
Channel | 03 Cable |
Start Time | 08:00 PM |
End Time | 09:30 PM |
Start Date | 11/16/00 Thu |
Tape Speed | SLP |
Press CLEAR to adjust
Press MENU to save
6.Change the speed with the SPEED button on the remote or the program end time with the CLEAR button on the remote (if necessary).
Changing the end time comes in handy when you are recording a program, such as a sporting event, that may exceed the scheduled broadcast time.
7.Press MENU to save the program.
Program 1 has been saved
Remember to insert a recordable tape and turn the VCR off before the program start time.
Remember to leave your cable box on.
Continued on Next Page
PlusCode is a registered trademark of the Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
VCR Plus+ Recording
Clock must be set correctly.
Insert a tape with the safety tab in place and enough tape to record the program.
UNRECOGNIZED NUMBER... PLEASE
PROGRAMS OVERLAP appears if you have entered two programs where the times overlap.
TIMER appears in the display when you turn off the VCR and a timer recording has been set. TAPE flashes if there is no tape in the VCR.
For a cable box, turn it on and tune it to the channel you want to record before the recording is to begin.
35