SETTING UP THE VCR
TO AUTO CHANNEL SEARCH
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3Time
4Channels
5Setup
6Preferences
7Audio
8Language
0Exit
2.Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Setup
5 Cable Box Setup
6 SAT Setup
0Exit
3.Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal are you using?
1 Cable TV
2Antenna
3Detect Automatically
0Cancel
4.Select one of the three AUTO CHANNEL SEARCH options.
•Cable TV searches for cable channels
•Antenna searches for local broadcast stations
•Detect Automatically will make this decision for you
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels— this takes about one to two minutes. When the scan is complete, the VCR tunes to the lowest channel number. At this point, pressing CHAN up or down on the remote control or VCR should only select the active channels.
Auto Channel Search
Use the Auto Channel Search feature to place all available channels in memory.
If you ever change cable or antenna signals, you may need to Auto Channel Search again.
Detect Automatically
A strong cable or antenna signal in your area may cause Auto Detect to
13