VCR BASICS
RECORDING
If you want to record something that you’re watching, you can use basic recording. For more detailed information, refer to the “Recording” section starting on the next page.
1.Set the tape speed by pressing TAPE SPEED on the VCR (SPEED on the remote).
2.Press the RECORD button to begin recording.
3.Press STOP to stop recording.
If you just want to pause the recording for a short time (such as during a commercial), press PAUSE instead of STOP.
•For more information about
CHECK THE SAFETY TAB
No matter which recording option you use, you need to make sure there is a tape in the VCR, and that the tape’s safety tab is in place. You cannot record on a tape with the safety tab removed.
Safety Tab
If the safety tab is removed and you want to record over it, simply cover the hole with vinyl tape.
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but fewer programs can be recorded on the tape. Special effects such as pause, slow motion, picture search, and frame advance work well when you play back tapes recorded in this speed.
SLP (Super Long Play)
Gives three times the recording time of tapes recorded in SP. Special effects such as pause, slow motion, picture search, and frame advance work well when you play back tapes recorded in this speed.
Recording Time
Cassette SP SLP
30