CONNECTIONS
TV WITH AUDIO/VIDEO JACKS AND CABLE BOX TO UNSCRAMBLE PAY CHANNELS ONLY
THIS CONNECTION ASSUMES:
•You are using a cable box only to unscramble premium channels.
•Your TV has audio/video input jacks.
THIS CONNECTION PROVIDES:
•Stereo sound playback from VCR.
•Recording a scrambled or unscrambled channel through the cable box while watching an unscrambled channel.
TO USE THIS CONNECTION, YOU MUST HAVE:
•(3) coaxial cables
•(3) audio/video cables
•(1) splitter
IF YOUR CABLE BOX IS REMOTE CONTROLLABLE:
•Position it above the VCR as shown. Make sure not to block any of the VCR’s ventilation holes.
TO CONNECT:
1.Connect cables as shown.
2.Return to First Things First, then follow the steps.
USING THIS CONNECTION
•Tune your TV to its video input channel.
•Use of TV•VCR button is not required.
•Use of TV•VCR button is not required. Set the Auto TV/VCR feature to “OFF.”
TO PLAY A TAPE:
1.Insert a tape.
2.If necessary, press PLAY.
TO RECORD A SCRAMBLED OR UNSCRAMBLED PROGRAM AND WATCH ANOTHER UNSCRAMBLED PROGRAM:
1.Begin recording a scrambled or unscrambled program through the cable box using one of the recording features.
2.Select an unscrambled channel on the TV.
Position
Cable Box
VCR |
CABLE BOX |
TRANSMITTER |
VCR'S |
SIGNAL |
All scrambled channels must be viewed through the VCR.
For Cable Box Setup, select ALL channels. See page 11.
CABLE
CABLE BOX
IN |
OUT |
VCR
AUDIO | ANT. IN | ||
|
| R | |
|
| L | |
OUT | IN | RF OUT | |
CH. | |||
|
| ||
VIDEO | 3 4 |
TV
VIDEO | VIDEO | R |
INPUT 1 |
| INPUT 2 |
R | R | L/MONO |
L/MONO | L |
|
AUDIO | CABLE/ | |
| ANTENNA | |
| OUTPUT |
|
64