OTHER FEATURES
(Continued from Previous Page)
3.Press FORWARD (FWD) to forward the tape until the time counter reads 0:30:00.
4.Press STOP. This is the approximate end of the program. (You may want to press PLAY to verify.) Now, you can begin recording at this spot.
5.Press INFO twice to remove the time counter from the screen and return to the normal display mode.
ON-SCREEN DISPLAYS
The INFO button shows the status of the VCR (Stop, Play Record, etc.), channel number, time counter, date, time, and tape speed on the TV screen. The date and time must be set before they can be displayed.
1.Press INFO to see the
2.Press INFO again to have only the time counter remain on the screen. The time counter is displayed in the VCR’s display panel.
3.Press INFO again to have no displays appear on the TV screen. The time counter remains in the VCR’s display panel. This is useful for dubbing tapes.
4.Press INFO again to return to the normal display. The current time is displayed in the VCR’s display panel.
Turning off the VCR also resets the displays.
AUDIO SET-UP FEATURES
The audio setup features affect your tape playback and recordings. The features in this section are accessed through the AUDIO menu and are shown in the displays below.
1.Press MENU to bring up the VCR MAIN MENU.
2.Press 7 to display the AUDIO menu.
AUDIO
1 Reception: STEREO
2 Tape Playback:
0 Exit
Now you are ready to select an item from the menu to set up.
56