VCR BASICS
PLAYING A TAPE
1.Tune the TV to your VCR viewing channel (3, 4, or TV’s video
2.Insert a tape in the VCR.
TV•VCR
POWER
VIDEO VIDEO
INPUT LEFTMONO RIGHT
STOP•EJECTRECORD
| PLAY |
| PAUSE |
REV | FWD |
CHANNEL |
|
TRACKING |
|
INPUT
If the Auto Play feature is set to ON, the tape automatically begins playback (if the safety tab on the cassette is removed).
•Press FWD on VCR (FORWARD on remote) or REV on VCR (REVERSE on remote) to position the tape.
•Press PLAY PAUSE (if necessary) on VCR (PLAY on remote) to begin tape play.
•Press PLAY PAUSE (PAUSE on remote) for stop action.
•Press TRACKING up or down to remove any streaks from the picture, if necessary.
•Press STOP•EJECT on VCR (STOP on remote) to stop playback.
AUTOMATIC REWIND
The VCR automatically rewinds the tape if it reaches the end of the tape during playback. While rewinding, you can press POWER on the VCR (ON•OFF on remote) and the VCR will turn off after rewinding.
TAPE EJECT
Press STOP•EJECT on the VCR (STOP on remote) for a few seconds when it is stopped to eject the tape. A tape can be ejected even when the VCR is off.
29