APPENDIX: REFERENCE
FRONT PANEL DIAGRAM
| TV•VCR |
| STOP•EJECT | RECORD |
POWER |
|
|
| |
|
|
|
| PLAY |
|
|
|
| PAUSE |
VIDEO | VIDEO | TAPE SPEED | REV | FWD |
INPUT | LEFTMONO RIGHT |
| CHANNEL |
|
TRACKING
INPUT
Remote Sensor
AUDIO (LEFT MONO, RIGHT) and VIDEO INPUT Jacks Receives signals from another component, such as a VCR or camcorder, when connected through these jacks. to record from these jacks, use the INPUT button on the remote control to select L2.
CHANNEL TRACKING Up/Down Selects next higher or lower channel in the VCR’s channel memory. When a tape is playing, these buttons adjust tracking. Press both buttons at the same time to recenter tracking.
FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback. Starts slow motion during
INPUT Toggles between the VCR’s video input channel and regular antenna/satellite connections. To view the broadcast from an external device (such as a camcorder) connected to the VCR’s audio/video jacks, tune to the VCR’s Video Line Input.
PLAY/PAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording to prevent recording of unwanted scenes.
POWER Turns the VCR on or off. The power button glows at all times, even when the VCR is turned off.
RECORD Starts VCR recording. Also used for Express Recording (XPR).
Remote Sensor Receives signals from the remote control. Aim the remote at this sensor.
REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during playback. Starts slow motion during
STOP•EJECT Stops normal VCR functions such as record, playback, rewind,
TAPE SPEED Selects a recording speed (either SP or SLP).
Transmitter Transmits signal to a compatible
TV•VCR Switches the picture signal so that it either comes from the VCR or the cable/ antenna system.
68