CONNECTIONS
TV WITH AUDIO/VIDEO JACKS
THIS CONNECTION ASSUMES:
•You are connecting an antenna, cable, or cable box system.
•Your television has audio/video jacks.
THIS CONNECTION PROVIDES:
•Stereo sound playback from VCR.
•Record one channel while watching another (except when using a cable box for all channels).
TO USE THIS CONNECTION, YOU MUST HAVE:
•(1) coaxial cable for cable/antenna connection; (2) for cable box
•(3) audio/video cables
IF YOUR CABLE BOX IS REMOTE CONTROLLABLE:
•Position it above the VCR as shown. Make sure not to block any of the VCR’s ventilation holes.
TO CONNECT:
1.Connect cables as shown.
2.Return to First Things First, then follow the steps.
USING THIS CONNECTION
•Tune your TV to its video input channel.
•Use of TV•VCR button is not required.
•Set the Auto TV/VCR feature to “OFF.”
TO PLAY A TAPE:
1.Insert a tape.
2.If necessary, press PLAY.
TO RECORD ONE PROGRAM AND WATCH ANOTHER:
1.Begin recording a program using one of the recording features.
2.Select a different channel on the TV.
Position
Cable Box
VCR |
CABLE BOX |
TRANSMITTER |
VCR'S |
SIGNAL |
CABLE, CABLE BOX, OR ANTENNA
VCR
AUDIO | ANT. IN | ||
|
| R | |
|
| L | |
OUT | IN | RF OUT | |
CH. | |||
|
| ||
VIDEO | 3 4 | ||
TV
VIDEO | VIDEO | R |
INPUT 1 |
| INPUT 2 |
R | R | L/MONO |
L/MONO | L |
|
AUDIO | CABLE/ | |
| ANTENNA | |
| OUTPUT |
|
63