CONNECTIONS
TV WITH RF JACK ONLY
THIS CONNECTION ASSUMES:
•You are connecting antenna, cable, or cable box system.
•Your television has only an RF input jack.
THIS CONNECTION PROVIDES:
•Mono sound playback from VCR.
•Record one channel while watching another (except when using a cable box for all channels).
TO USE THIS CONNECTION, YOU MUST HAVE:
•(1) coaxial cable for cable or antenna connection; (2) for cable box
IF YOUR CABLE BOX IS REMOTE CONTROLLABLE:
•Position it above the VCR as shown. Make sure not to block any of the VCR’s ventilation holes.
TO CONNECT:
1.Connect cables as shown.
2.Return to First Things First, then follow the steps.
USING THIS CONNECTION
•Tune your TV to channel 3 or 4, whichever one you selected with the CH. 3/4 switch on the back of the VCR.
•Set the Auto TV/VCR feature to “ON.”
TO PLAY A TAPE:
1.Insert a tape.
2.If necessary, press PLAY.
TO RECORD ONE PROGRAM AND WATCH ANOTHER:
1.Begin recording a program using one of the recording features.
2.Press the TV•VCR button and select a different channel on the TV.
Position
Cable Box
VCR |
CABLE BOX |
TRANSMITTER |
VCR'S |
SIGNAL |
CABLE, CABLE BOX, OR ANTENNA
VCR
AUDIO | ANT. IN |
R
L
RF OUT
OUT IN
CH.
VIDEO | 3 4 |
TV
CABLE/
ANTENNA
62