Panasonic BT-LH2550E, BT-LH2550P manual Marker, Sub menu Setting Description, BACK*2, CENTER*2

Main Menu (continued)

MARKER

This function is not available in split screen display of the TWO WINDOW function. (CROSS HATCH is not affected.)

			Underlined values indicate factory defaults.
Sub menu	Setting	Description
MARKER	OFF*1	Turns the MARKER setting on and off.
	ON
16:9*2*3*4	OFF	Selects/displays the 16:9 marker type.
	4:3	<OFF>	No marker display
	13:9	<4:3>	4:3 marker	<13:9>	13:9 marker
	14:9	<14:9>	14:9 marker	<CNSCO> CNSCO marker
	CNSCO	<VISTA>	VISTA marker	<95%>	95% area marker
	VISTA	<90%>	90% area marker	<80%>	80% area marker
	95%	<93%>	93.1% area marker (TYPE1)
	93%		93% area marker (TYPE2)
	90%	<88%>	89.5% area marker (TYPE1)
	88%		88% area marker (TYPE2)
	80%	<USER>	This area marker can be varied in 1% increments in the range
	USER 85%		between 80% to 95%. However, an 88% value for a TYPE1
			MARKER TYPE indicates an area marker whose height is 89% of
			available screen height in the selected aspect ratio.
			(The factory default is 85%.)
4:3*2*4	OFF	Selects/displays the 4:3 marker type.
	95%	<OFF>	No marker display
	93%	<95%>	95% area marker	<93%>	93% area marker
	90%	<90%>	90% area marker	<80%>	80% area marker
	88%	<88%>	89% area marker (TYPE1)
	80%		88% area marker (TYPE2)
	USER 85%	<USER>	This area marker can be varied in 1% increments in the range
			between 80% to 95%. Values of 93% and 88% for TYPE1
			MARKER TYPE indicate area markers whose height is 93.1% and
			89.5%, respectively, of available screen height in the selected
			aspect ratio.
			(The factory default is 85%.)
BACK*2	NORMAL	Selects the background brightness around the marker.
	HALF	<NORMAL> Normal background
	BLACK	<HALF>	50% background brightness
		<BLACK>	0% background brightness (black)
CENTER*2	OFF	Displays/turns off the center marker.
	ON	<OFF>	Turns the display off
		<ON>	Turns the display on

*1	This setting is turned “ON” when receiving marker control in REMOTE operation. (GPI, if set, has priority.)
*2	These settings are disabled when the GPI function ( page 48) is used to control the marker setting.
	They are also disabled in split screen mode.
*3	This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode.
*4	TYPE1 and TYPE2 area marker size depends on the “MARKER TYPE” setting ( page 23).

22