Panasonic BT-LH2550P HV Delay, Auto Setup, Gamma Select, SD Aspect, Scan, TWO Window, Wfm/Vector

Main Menu (continued)

■FUNCTION setting restrictions

Settings are not available under the following conditions.

Setting	Conditions that disable operation
HV DELAY	In TWO WINDOW and WFM mode, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
	When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under
	“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
AUTO SETUP	When something other than “RGB-COMP.” is selected under “YPBPR/RGB” in the “INPUT
	SELECT” menu, “NOT RGB-COMP. CH” appears to indicate that operation is disabled.
	When “RGB-COMP.” is selected under “YPBPR/RGB” in the “INPUT SELECT” menu and
	no signal is input, “INCOMPLETE” appears to indicate that operation is disabled.
GAMMA SELECT	When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
	When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under
	“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
SD ASPECT	When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled. In
	TWO WINDOW mode and HD signal display, “INVALID FUNCTION” appears to indicate
	that operation is disabled.
SCAN	When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
	In TWO WINDOW mode, “INVALID FUNCTION” appears to indicate that operation is
	disabled.
TWO WINDOW	When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under
	“DVI-D” in the “INPUT SELECT” menu, the display toggles between single screen display
	of the main window and sub-window. When WINDOW SIZE is something other than M/M,
	the SINGLE MAIN and SINGLE SUB screens appear alternately, but no still image screen
	appears. When the input signal terminals of video displayed in the main window and sub-
	window differ, the SINGLE MAIN and SINGLE SUB windows appear alternately, but no still
	image screen appears.
WFM/VECTOR	In TWO WINDOW mode, “INVALID FUNCTION” appears to indicate that operation is
	disabled.
	When “RGB-COMP.” or “RGB-VIDEO” is selected under “YPBPR/RGB”, or “DVI-COMP.” or
	“DVI-VIDEO” is selected under “DVI-D” in the “INPUT SELECT” menu, “INVALID
	FUNCTION” appears to indicate that WFM operation is disabled. The VECTOR display
	does not appear for signals other than SDI input.
MARKER	When “RGB-COMP.” is selected under “YPBPR/RGB” or “DVI-COMP.” is selected under
	“DVI-D” in the “INPUT SELECT” menu, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
	When GPI is set during TWO WINDOW operation, “INVALID FUNCTION" appears to
	indicate that operation is disabled.
LEVEL METER	When input is something other than SDI, “INVALID FUNCTION” appears to indicate that
	operation is disabled.
MONO	When GPI is set, “INVALID FUNCTION” appears to indicate that operation is disabled.
TIMECODE	When input is something other than HD-SDI input, “INVALID FUNCTION” appears to
	indicate that operation is disabled.
ANAMO	When input is something other than HD-SDI signal input, “INVALID FUNCTION” appears
	to indicate that operation is disabled.

33