Panasonic BT-LH2550E, BT-LH2550P manual Audio

Main Menu (continued)

AUDIO

Use the following submenus to set headphone output and audio level meters.

Underlined values indicate factory defaults.

Sub menu	Settings	Description
INPUT	AUTO	Selects input line for audio output to headphone terminal.
SELECT	ANALOG	<AUTO> When an SDI input line is selected with the [INPUT] button on
		the front panel:
		embedded audio (SDI terminal)
		When input lines other than SDI1 or SDI2 are selected with
		the [INPUT] button on the front panel:
		analog (AUDIO input terminal)
		<ANALOG> Analog (AUDIO input terminal)
EMBEDDED	CH1 - CH8	Selects embedded audio channel output to the left (L) speaker.
SELECT L	(Factory
	default: CH1)
EMBEDDED	CH1 - CH8	Selects embedded audio channel output to the right (R) speaker.
SELECT R	(Factory
	default: CH2)
LEVEL	OFF	Selects/turns off the audio level meter displayed by OSD.
METER*1	ON
CH SELECT	8CH	Selects the number of audio level meter channels.
	4CH
	2CH
0dB POINT	OFF	Selects and turns off 0 dB line on/off displayed on the audio level meter.
	ON
CH INFO.	OFF	Selects and turns off displays on the audio level meter.
	ON

*1 When ANALOG is selected in the “INPUT SELECT” menu, the LEVEL METER does not indicate the audio level meter even when set to ON.

38