Panasonic BT-LH2550P, BT-LH2550E manual Display Setup

Main Menu (continued)

DISPLAY SETUP

			Underlined values indicate factory defaults.
Sub menu	Settings	Description
TWO	L/S	Selects size of split-screen displays.
WINDOW	M/M	<L/S> main window LARGE, sub-window SMALL
SIZE	S/L	<M/M> main window MEDIUM, sub-window MEDIUM
		<S/L> main window SMALL, sub-window LARGE
SUB INPUT	VIDEO	Selects sub-window input in split-screen display.
SEL.	SDI1
	SDI2
	YPBPR/RGB
	DVI-D
WFM/	OFF	Switches between “WFM/VECTOR” waveform and vector display.
VECTOR	WFM	<WFM>	Displays waveforms.
	VECTOR	<VECTOR> Displays vector waveforms.*3
POSITION	LB	Selects the position for the “WFM/VECTOR” waveform display.*3
	RB	<LB>	Left Bottom
	RT	<RB>	Right Bottom
	LT	<RT>	Right Top
		<LT>	Left Top
VECTOR	× 8	Enlarges vector waveforms.*3
MODE	× 4	<× 8>	8×
	× 2	<× 4>	4×
	× 1	<× 2>	2×
		<× 1>	1×
VECTOR	100%	Determines the scale of vector waveform.
SCALE	75%	<100%>	Displays it at 100% scale.
		<75%>	Displays it at 75% scale.
TIME CODE	OFF	Turns the time code display on and off.*1
	ON
POSITION	TOP	Selects position of time code display.
	LEFT	<TOP>	Top center of screen
	CENTER	<LEFT>	Bottom left of screen
	RIGHT	<CENTER> Bottom center of screen
		<RIGHT>	Bottom right of screen
FONT SIZE	LARGE	Selects font size of time code display.
	SMALL	<LARGE>	Twice the height and width of menu font size
		<SMALL>	Menu font size
MODE	LTC	Selects time code display mode.*1
SELECT	VITC	<LTC>	Displays linear time code (LTC).
	LUB	<VITC>	Displays vertical interval time code (VITC).
	VUB	<LUB>	Displays user bits included in LTC.
		<VUB>	Displays user bits included in VITC.
CLOSED	OFF	Turns closed caption display on and off.*2
CAPTION	ON
MODE	CC4	Selects the closed caption display mode.*2
SELECT	CC3
	CC2
	CC1

*1 Available during HD-SDI input signals.

*2 Available during VIDEO (NTSC) input. Closed captions appear as bright lines on line 21 when closed caption is set to ON and underscan is also on.

*3 Opens the vector display during SDI signal input.

39