Panasonic BT-LH2550E, BT-LH2550P manual Video Config

Main Menu (continued)

VIDEO CONFIG

			Underlined values indicate factory defaults.
Sub menu	Settings	Description
GAMMA	STANDARD	Selects gamma curve. The gamma curve in the sub-window can be
SELECT*1*2	STDIO/PST	set in the split-screen display and sub-window display (single screen)
	FILM	of the “TWO WINDOW” function.
		<STANDARD> Standard mode
		<STDIO/PST> Color emphasis mode (a mode that approximates CRT
			display capability suitable for studio or postproduction
		<FILM>	application)
			Film mode (For VARICAM use)
		The	mark appears at the top left of the screen when “FILM”
		is selected.
COLOR SPACE	SMPTE-C*7	Sets the color space. The color space in the sub-window can be set in
	EBU*7	the split-screen display and sub-window display (single screen) of the
	ITU-709	“TWO WINDOW” function.
	WIDE1	<SMPTE-C> SMPTE-C standard
	WIDE2	<EBU>	EBU standard
	WIDE3	<ITU-709> ITU-R BT. 709 standard
		<WIDE1>	Sets the gamma curve to 2.2 in wide color gamut (using
			Adobe color space) mode.
		<WIDE2>	Sets the gamma curve to 1.8 in wide color gamut (using
			Adobe color space) mode.
		<WIDE3>	Sets the gamma curve to 2.6 in wide color gamut (using D-
			Cinema color space) mode.
COLOR TEMP.	USER0 - 63*5	Selects color temperature. Both the main window and sub-window can
	D93	be set up in the split-screen display of the “TWO WINDOW” function.
	D65	<USER 0 - 63> Adjustable settings 0 - 63 (equivalent to a color
	D56		temperature range of 3,000 - 9,300K)
	VAR1	<D93> Equivalent to a color temperature of 9,300K
	VAR2	<D65> Equivalent to a color temperature of 6,500K
	VAR3	<D56> Equivalent to a color temperature of 5,600K
		<VAR1> WB adjustment mode*4		<VAR2> WB adjustment mode*4
		<VAR3> WB adjustment mode*4
		USER20 is approximately 5000 K and USER33 is approximately 6300 K.
SHARPNESS	HIGH*3	Selects the width of outline correction edge. Both the main window
MODE*2	LOW	and sub-window can be set up in the split-screen display of the “TWO
		WINDOW” function.
		<HIGH> Thin edge		<LOW> Wide edge
SHARPNESS H*2	0 - 30*3	Sets horizontal outline correction. The item display moves to the lower
		part of the screen during adjustment. Both the main window and sub-
		window can be set up in the split-screen display of the “TWO
		WINDOW” function.
SHARPNESS V*2	0 - 30*3	Sets vertical outline correction. The item display moves to the lower
		part of the screen during adjustment. Both the main window and sub-
		window can be set up in the split-screen display of the “TWO
		WINDOW” function.

*1	Changes are not reflected to a still image in the main window in the split-screen display of the “TWO WINDOW”
	function.
*2	These functions are not available when “RGB-COMP.” under “YPBPR/RGB” or “DVI-COMP.” under “DVI-D” is
	selected in the “INPUT SELECT” menu (	page 36). The gamma curve is set to STANDARD when “RGB-
	COMP” or “DVI-COMP” is selected. Selecting WIDE1 to 3 for “COLOR SPACE” produces the gamma curve
	fixed to that “COLOR SPACE.”
*3	The following sharpness values are available and the settings for the selected input signal is displayed.
	Adjustment status during selection appears at the bottom right of the screen.
	1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0)
	2) HD for any other input (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H/V: 0).
	3) SD for any other input (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H/V: 0).
*4	Selecting “VAR1”, “VAR2” and “VAR3” engages the WB adjustment mode ( page 28).
*5	To select USER0 - 63,
	1) Press [ENTER] (“USER” changes to blue).	2) Use [ , ] to select 0 - 63 and press [ENTER].
*7	Factory default setting: SMPTE-C (U.S.A. and Canada), EBU (other countries)

26